Zflyer Posted January 31, 2022 Share Posted January 31, 2022 Now I know that someone here will have the answer probably a quad copter flyer. I have a Caddx Ratel 1200tvl camera which I understand links into a drone flight controller , which I do not have. I am after advise as to what tx I can use. The camera has a four pin and a two pin set up.. Its to be mounted on a fixed wing. Quote Link to comment Share on other sites More sharing options...
Frank Skilbeck Posted January 31, 2022 Share Posted January 31, 2022 Basically just about any video transmitter will work, 3 wire, +ve, ground and video, the connection to the flight controller is so information from the flight controller can be displayed in the view finder. The video Tx needs to be compatibly with your video receiver/googles. Quote Link to comment Share on other sites More sharing options...
andyh Posted February 1, 2022 Share Posted February 1, 2022 something like this would do you: https://www.banggood.com/Eachine-TX801-5_8G-72CH-0_01mW-5mW-25mW-50mW-100mW-200mW-400mW-600mW-Switched-AV-VTX-FPV-Transmitter-p-1147691.html?cur_warehouse=CN&rmmds=buy this video explains how to wire up a camera & VTx without a flight controller: https://www.youtube.com/watch?v=46y8fhmvCyQ Quote Link to comment Share on other sites More sharing options...
Paul De Tourtoulon Posted February 1, 2022 Share Posted February 1, 2022 Make sure that air can circulate around the TX, when running around 200w they do get hot and never run one without an ariel. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.