Edgeflyer Posted October 29, 2023 Share Posted October 29, 2023 I have a v949 drone with wltoys tx in mode 1 and I would like mode 2. Does any6knoe if it can be changed either internally or through its function switched? The top left button usually does change modes in this type of tx but on this particular one it cycles through throttle power ranges. The board inside says mode 2 in one too corner and mode 1 in the other. The LCD screen says mode 1 as though it should. Be changeable. Quote Link to comment Share on other sites More sharing options...
Rich Griff Posted October 30, 2023 Share Posted October 30, 2023 Interesting.... Don't know of your tx, perhaps a picture of the "board" may help, particularly showing the tracks... Futaba t6l, the basic one, tx comes mode 2 but user manual shows simple conversion to mode 1 by "snapping off" a corner of the board, cutting out a loop of track. I presume if a jumper wire was soldered to mimic the snapped off section of board, that would convert it back to mode 2. The rachet throttle mechanism is an easy but a bit fiddly alteration. Maybe your board has a "jumper" wire, hence call for a picture. What do wl toys say ? Quote Link to comment Share on other sites More sharing options...
leccyflyer Posted October 30, 2023 Share Posted October 30, 2023 Don't know if this is of any use for your issue. https://www.rcgroups.com/forums/showthread.php?2060494-Switching-Modes-on-WL-Toys-switchable-Transmitter Quote Link to comment Share on other sites More sharing options...
Edgeflyer Posted October 30, 2023 Author Share Posted October 30, 2023 Thanks for those replies. I couldn't see any jumpers or tracks on the board or any way to change the spring actions so I've drawn a blank. I had read those posts and tried all possible permutations of buttons to no avail. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.