Basil

I have heard back from SELC, they will be cutting for LIL Cub.As there are some up front costs, if you are interseted contact them as it may help reduce the price!!!!!!!!!!!!! barry

I have been in contact with SELC re parts cutting. They will be supplying cut parts , a plan may also be available, in the next couple of weeks. If you are interested please contact them as there is a certain amount of up front costs that have to be covered ,so initially this may help with keeping the price down. Barry

Thanks P P P P Peter Barry

I have heard back from SELC regarding cutting parts for Li'l Cub.They are going to proccess the Pdf that I sent them and cut some parts. It seems that this has been precipitated by a request from an additional person. They are now saying that a kit will be available . If you want one please contact them as this may reduce the price by spreading the cost of turning the plan into cutting data. According to Peter Sarik do not produce a plan so they will may supply that as well!! Please spread the word and help to cut the initail cost Barry

Gentlemen , I see from the posts that at least 2 of you are using 2d cutting!!!!!!!!!!. I might be wrong about that but some are using 3d printing. I have had an offer regarding such equipment and would like to discuss this with those of you that know,. rather than cloud the forum would you contact me  using a PM witha view to disscussion ? . There are many things that I would like to clarify. Thanks in advance. Barry Edited By Basil on 05/03/2020 09:35:13

With Peter's permission I have sent a plan to SELC with a view to cutting parts and or supplying a kit.. I am currently awiating to hear back from them regarding this matter. Barry

Peter's plan has been sent to SELC with a view to cutting parts and ,or supplying a kit.. I am currently awaiting news back from them regarding this matter. Barry

Daniel, I have sent you a PM. Barry

Dan, been in contact with SELC about a cut kit. I am trying to contact Peter before progressing as it is his design. In short before cutting starts they must have some sort of CAD file for the machine to use. They can make a CAD file from the plan, obviously at some cost, understandably, so in my mind the possiblity of who's CAD it is and then who's who after that????????????? So if I speak to Peter first and run it by him. IF it goes then a kit will be available. Barry

Many thanks to both Peter and Steven for your comments. Peter I thought I was loosing the plot when I failed to find that originally quoted. I will have to consider both , Once again many thanks to you both. Barry

Hi Daniel, SELC said I should send them the plan and they would send me an estimate. Sarik said 'Check back in acouple of months'. I will contact SELC. Have you actually built this model?. Barry

Peter , on the plan it quotes '4max PP-rack 4260 mount' for the motor. I cant find this item anywhere. Could you please give me some guidance on a motor mount. ( Sorry to be such a pain). Many thanks Barry

Hi, I cant find anybody that supplies a kit already. Skip models have replied that they will look at my plan and quote!!! Barry

Thank you Peter & Steven for your feed back. I will follow these up. Regards Barry

I am having trouble sourceing some reasonably priced the main wheels. can any body have any suggestions? Thank you in advance Barry

Hi Jim, thanks for the link. Looks like just the Kiddie !!! Regards Barry

Hi, can anybody tell me about the pilot figure for the Dawn Flyer !!!! The only reference to the figure is Lindsays reference; ' Parkzone Pilot'. What is the scale and where is the best place to look?. Thank you in advance. Sarik who sell the kit do not stock pilots so I am up a gum tree. I am also having trouble finding wheels as 'Flair' dont seem to be around!!!!! (3" are reccomended)   Thanks for any suggestions, well all that are physically possible. Barry Edited By Basil on 03/12/2019 09:30:09

Many thanks to , Nigel, Don and Bob for your suggestions. Barry

I forgot to say I would like a nonglossy finish. Ideally satin. Is the Oratex like so. Barry

Hi, I've been away from modeling for quite awhile. I am looking for a covering for the 'Dawn flyer', ww1 plane, that looks the part. Any suggestions. Regards Barry.

HI, NOT SURE IF THIS IS THE CORRECT FORUM !!!!!. I am trying to build the ' Dawn Flyer',(WW1 type fighter) and looking for a suitable covering , ie Linen look alike. I have been away from modelling for some years and am rather out of touch. Can any one suggest what I could use please. Regards Barry

Thank both, Martin & Don for your input. Yes it was cheap at a little over £9. It is identical to thepicture furnished by Martin, and the same but with the word Storm as on SMC,( @ £19.). I have also learned some thing about Helis, re channel use( Just bought an old second hand Align and spent time trying to get things running, and sustained minor injuries taboot. I suppose I could start a thread about that, but not now!!!! I am going to put it in the Revolver (autogyro)see post. So thank you once again Martin and Don .Regards Barry

Thank both, Martin & Don for your input. Yes it was cheap at a little over £9. It is identical to thepicture furnished by Martin, and the same but with the word Storm as on SMC,( @ £19.). I have also learned some thing about Helis, re channel use( Just bought an old second hand Align and spent time trying to get things running, and sustained minor injuries taboot. I suppose I could start a thread about that, but not now!!!! I am going to put it in the Revolver (autogyro)see post. So thank you once again Martin and Don .Regards Barry

Martin, its 2.4 and the brand is Storm( an S603 DSMX) A new brand to me, for spektrum TX. I have been unable to obtain any info from them , its not available. Barry

Hi, I am an old retunee and I have a lot to learn and catchup on. When talking recievers, what is a PPM............? I have just bought a new RX that has an input/output that is labelled PPM., There is similar ' STAT ' , can someone fill me in please. Barry Edited By B YELLOP on 30/07/2019 14:16:58