Ron Gray Posted April 25, 2021 Share Posted April 25, 2021 12 hours ago, Dwain Dibley. said: I know, plus I was only 16. D.D. Youngsters! 1 Quote Link to comment Share on other sites More sharing options...
Roy Thompson Posted April 25, 2021 Author Share Posted April 25, 2021 5 hours ago, ron evans said: Kit prices do look good back then, but the flip side is radio. A servo for my Skyleader set was £20 in 1972, probably about £200 now. We've never had it so good. Ron On the up side you didn't need to remember which model memory to use, what function on which switch ? Just hope the local CB club weren't in the area! 1 Quote Link to comment Share on other sites More sharing options...
ron evans Posted April 26, 2021 Share Posted April 26, 2021 (edited) Yes I remember well the CB interference days. Unfortunately they didn't need to be close to shot you down, sunspot activity meant that their signal could go a long way. My clever Spektrum radio doesn't let you select the wrong model, though not clever enough to tell you a control surface is reversed. Yep done that recently ? Love the Fleet gear. I learned to fly on Fleet GG. Ron Edited April 26, 2021 by ron evans Quote Link to comment Share on other sites More sharing options...
Bob Morris 2 Posted April 26, 2021 Share Posted April 26, 2021 I have a Bowman Miles Magister purchased in 2003 and still not finished. Excellent quality kit Quote Link to comment Share on other sites More sharing options...
Roy Thompson Posted April 27, 2021 Author Share Posted April 27, 2021 On 26/04/2021 at 11:02, Bob Morris 2 said: I have a Bowman Miles Magister purchased in 2003 and still not finished. Excellent quality kit Nice one Bob I hadn't seen the Magister thanks for chipping in with that one, any build threads, photos etc... Thanks List updated Bowman Model kits.pdf Quote Link to comment Share on other sites More sharing options...
Roy Thompson Posted May 1, 2021 Author Share Posted May 1, 2021 (edited) I went for a nice drive this morning to pick up my latest eBay purchase! Another old Bowman model this one built pre 1982 buy the seller Jim, but not used for many years. Must be my best ebay purchase yet. Jim could have not been more helpful, as we went through the model and motor. Since getting it home I've started going through it checking everything after a long layup. The OS 70 four stroke looks in good order and only a little gummy. Considering it's age the build and finish is excellent, very pleased with It. Edited May 1, 2021 by Roy Thompson Quote Link to comment Share on other sites More sharing options...
David Ashby - Moderator Posted May 2, 2021 Share Posted May 2, 2021 Interesting Roy, not one of theirs I've seen before. It's amazing what people have stashed away. ? Quote Link to comment Share on other sites More sharing options...
Roy Thompson Posted May 2, 2021 Author Share Posted May 2, 2021 Not one I knew about either until I started looking in to their later kits, & I know zero about the full size. The only thing I do know is there won't be another at our field ? Quote Link to comment Share on other sites More sharing options...
David Ashby - Moderator Posted July 29, 2021 Share Posted July 29, 2021 I've failed Roy. Finally got the plan from the chap who promised it was the Super 100. Turned out to be the Super Simpleton 96". It seems pretty near identical as far as I can remember, apart from the slightly reduced span. The good news is that it has the instruction sheet. I'm going to get the plan copied, the instructions too, then I'll have pdf copies for anyone who wants one. 1 Quote Link to comment Share on other sites More sharing options...
Roy Thompson Posted July 29, 2021 Author Share Posted July 29, 2021 (edited) That’s a shame, Dave, but possibly not the end of the road! I’ve had a couple of conversations with a chap who has purchased Bowman Kits & we may see the name again. I’ll try & ask about the Super 100” next time I talk to him. Looking forward to seeing next mouths Mag ? Edited July 29, 2021 by Roy Thompson 1 Quote Link to comment Share on other sites More sharing options...
David Ashby - Moderator Posted July 30, 2021 Share Posted July 30, 2021 Yep, saw that ? Quote Link to comment Share on other sites More sharing options...
Jamie Cuff Posted August 5, 2021 Share Posted August 5, 2021 This is my dads Simple Stuntman powered by a Webra Speed 40, it was taken at Westonzoyland in 1978. I have been trying to get hold of one for him, without any luck, not even so much as a plan. Bowman produced some good models, built quite a few in later years such as the Spatman, the later Stuntman and the Skyraider. Quote Link to comment Share on other sites More sharing options...
Roy Thompson Posted August 8, 2021 Author Share Posted August 8, 2021 (edited) Thanks, Jamie, for the picture. It's a shame, but there doesn't seem to be much around about the Stuntman. Ron Evens post is the only other. Looks like it's a good sports model. Quick up to my DB, added a Sunduster kit to my collection. Bowman Model kits DataBase.docx Edited August 8, 2021 by Roy Thompson Quote Link to comment Share on other sites More sharing options...
Nightflyer Posted August 8, 2021 Share Posted August 8, 2021 On 29/07/2021 at 18:54, David Ashby - Moderator said: I've failed Roy. Finally got the plan from the chap who promised it was the Super 100. Turned out to be the Super Simpleton 96". It seems pretty near identical as far as I can remember, apart from the slightly reduced span. The good news is that it has the instruction sheet. I'm going to get the plan copied, the instructions too, then I'll have pdf copies for anyone who wants one. David/Roy my club is not far from Ipswich and we have a membership that stretches back over time. If you are eager for a plan I am pretty sure someone will have one. The other source you might find one is a shout for help from Hastings 1066 MFC who used to have a couple of members who were into Bowman's kits. Such a shame Bowmans and Galaxy are no more. It might be worth asking Pegasus Models if they have any knowledge, I know they are producing some of the Galaxy models. Regards Paul 1 Quote Link to comment Share on other sites More sharing options...
Roy Thompson Posted August 10, 2021 Author Share Posted August 10, 2021 On 08/08/2021 at 22:48, Nightflyer said: David/Roy my club is not far from Ipswich and we have a membership that stretches back over time. If you are eager for a plan I am pretty sure someone will have one. The other source you might find one is a shout for help from Hastings 1066 MFC who used to have a couple of members who were into Bowman's kits. Such a shame Bowmans and Galaxy are no more. It might be worth asking Pegasus Models if they have any knowledge, I know they are producing some of the Galaxy models. Regards Paul Thank you for the info Paul, Hopefully in the near future we may have some positive news about some of Bowman’s kits, ?? See my item in Septembers RCM&E when its out! Regards Roy Quote Link to comment Share on other sites More sharing options...
Nightflyer Posted August 10, 2021 Share Posted August 10, 2021 13 hours ago, Roy Thompson said: Thank you for the info Paul, Hopefully in the near future we may have some positive news about some of Bowman’s kits, ?? See my item in Septembers RCM&E when its out! Regards Roy Hi Roy, I shall await the article with interest. In the interim I shall ask around the club. Bowman's as was Galaxy were local. It is important to try to save or resurrect some of these designs where possible as they played an important part in this country's rc aeromodelling history and are fun. Regards Paul Quote Link to comment Share on other sites More sharing options...
Roy Thompson Posted June 15, 2022 Author Share Posted June 15, 2022 Bowman Model kits - Mini Skyman. It’s been awhile since we had any new post here, so here goes. Having just finished building a small retro Chicken Hawk 1/2A model for a friend, I was looking for a quick build for myself. I’d downloaded the Mini Skyman plans some time back and been tempted to make a start on it ever since, I also had some low quality balsa sheets (from an online purchase possibly late at night!) in my scrap box I’d been wanting to use up. The small size of the Skyman parts meaning I could get most of them out of the usable wood. A couple of weeks back then I started putting together a kit of parts, and apart from the strip wood and some ply, I think all the wood came out of the scrap box. I’ve made two major mod’s to it as you can see from the photos, first I’ve converted it to electric using a shocky motor I made from a kit years ago, and using a 2S LiPo & an 8x4 prop. Hopefully this will be an suitable replacement for a Cox 049. Next up after a lot of back and forth I’ve decided to add ailerons to the wings. It’s coming nicely and I’m working on the covering, I did think about doing all in Tissue but I see the instruction say the prototype was covered in solafilm. As I’ve got plenty of tissue left over from the last project, I’m doing the fuselage in tissue and the wing in film . Next I wanted a retro looking scheme from the 80’s and its coming on well, it sort of reminds me of some old airline ? 1 Quote Link to comment Share on other sites More sharing options...
Roy Thompson Posted November 19, 2022 Author Share Posted November 19, 2022 (edited) It accrued to me that I never posted any pictures of the finished Mini Skyman, so better late than never, here is my rendition complete with electric conversion and aileron wing. The good news is, it has flown several times this year, and will ROG. My little home-build kit motor has just enough power on days when there is no more than a light breeze, not that you would want to fly her on any other days. The amount of adverse yaw from the ailerons was not what I was expecting, but with a good helping of rudder, or just rudder, it turns. I'm not entirely happy with the look of the wing and the mix of tissue & film covering, so may make a standard wing with tissue covering at some point. Edited November 19, 2022 by Roy Thompson 1 Quote Link to comment Share on other sites More sharing options...
Andy Gates Posted November 20, 2022 Share Posted November 20, 2022 Roy, Your pictures bring back many memories for me. I had one as a youngster running on a BabyBee motor and had to be hand launched over a very deep grassed field. Fitted an OS10 later on which made getting away much easier. Regarding the adverse yaw, can I suggest you install some mechanical aileron differential? Quote Link to comment Share on other sites More sharing options...
Roy Thompson Posted November 20, 2022 Author Share Posted November 20, 2022 2 hours ago, Andy Gates said: Regarding the adverse yaw, can I suggest you install some mechanical aileron differential? Thanks Andy, she’s ready to go with differential setup on the servos arms, just waiting for the opportunity to give it ago. Quote Link to comment Share on other sites More sharing options...
BSR Posted November 29, 2022 Share Posted November 29, 2022 I have the Bowman Sportsman, been lovingly restored right down to the fake aerial running over the back and with period SLEC fittings and 148 servos. Engine will be a TT54 Fourstroke once I get it running smoothly. Had a 48 Surpass but didn't have the power. I have the plan too, all be it faded somewhat. Cowl was smashed and its the last piece of the puzzle. The Sportsman was actually issued under a few brands from what I can see, Bowman Models, Olympic Models and Hegi. If anybody has a cowl I could borrow to make a mould.... 🙂 Quote Link to comment Share on other sites More sharing options...
gangster Posted November 29, 2022 Share Posted November 29, 2022 6 hours ago, BSR said: I have the Bowman Sportsman, been lovingly restored right down to the fake aerial running over the back and with period SLEC fittings and 148 servos. Engine will be a TT54 Fourstroke once I get it running smoothly. Had a 48 Surpass but didn't have the power. I have the plan too, all be it faded somewhat. Cowl was smashed and its the last piece of the puzzle. The Sportsman was actually issued under a few brands from what I can see, Bowman Models, Olympic Models and Hegi. If anybody has a cowl I could borrow to make a mould.... 🙂 The Olympic Sportsman was one of my first RC models. I got very excited when I went into Anglia Models just after they moved. That model was on a list of sale models they had. Sadly it was gone Quote Link to comment Share on other sites More sharing options...
Christina Posted November 29, 2022 Share Posted November 29, 2022 Hi, I have been given my laye step dad's bowman hurricane 50" wingspan model kit, unbuilt in its original box Is this something worth selling? I have kept all his corgi models but this is too big to store and would like it to go somewhere it would be built and flown Message me for more details thanks Christina Quote Link to comment Share on other sites More sharing options...
Roy Thompson Posted November 29, 2022 Author Share Posted November 29, 2022 Amazing that one model was sold under 3 different kit makers, even the same model being used for the box art. Not one I came across unfortunately but it looks like it was a tidy sports model. I hope you find a cowling BSR. Christina, Hi welcome to the thread and sorry for your loss. The Hurricane kit is certainly is worth selling, especially if it’s untouched and in box. A very rare find, I’ll message you with some advice on some reliable ways to move it on, just be wary of anyone trying pull a fast one. 1 Quote Link to comment Share on other sites More sharing options...
Roy Thompson Posted December 1, 2022 Author Share Posted December 1, 2022 Here’s a fun little question for everyone. If there could be one Bowman kit brought back to life, which one should it be and why? 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.