ERIC DODSWORTH Posted June 6, 2023 Share Posted June 6, 2023 Not sure if I'm in the right place someone here might be able to help I have a jumper t16 4 in 1 and an I range X 4 in1 trying to find out what protocol works with some receivers I have These are the RX's they are branded as code but are the same as etronix and tamco not actually going in a plane for a boat ⛵ Thanks in advance Quote Link to comment Share on other sites More sharing options...
GrumpyGnome Posted June 6, 2023 Share Posted June 6, 2023 FHSS..... https://www.makeitbuildit.co.uk/code-2-4g-fhss-receiver-suits-cr277-51088?msclkid=74bc74e4fbb11519e778109a2ec17d51&utm_source=bing&utm_medium=cpc&utm_campaign=Dynamic Search - All Pages MM&utm_term=makeitbuildit co&utm_content=DSA - All Pages MM Quote Link to comment Share on other sites More sharing options...
ERIC DODSWORTH Posted June 6, 2023 Author Share Posted June 6, 2023 I know it's fhss but what version the jumper does carona futaba and various other fhss protocol just haven't found the right one yet hoping someone else has already done it and can tell me which one to try Thanks for the quick reply though Quote Link to comment Share on other sites More sharing options...
GrumpyGnome Posted June 6, 2023 Share Posted June 6, 2023 You're welcome. Looking at the MPM protocols table, it list FHSS as an option for Kyosho so I'd start there. There are quite active boat and radio forums on RCGroups that tend to be quite helpful as well.... I haven't done it so it's all theoretical 🙂 Quote Link to comment Share on other sites More sharing options...
Phil Green Posted June 6, 2023 Share Posted June 6, 2023 FHSS is simply a method of broadening the signal, it doesnt define the protocol, Futaba confuse things by calling their 'budget' protocol FHSS, which it is, but FASST also uses frequency hopping. 🙂 Also some manufacturers do 'surface' versions of their protocol... I think all you can really do is to try all combinations! Quote Link to comment Share on other sites More sharing options...
MattyB Posted June 6, 2023 Share Posted June 6, 2023 (edited) 5 hours ago, ERIC DODSWORTH said: I know it's fhss but what version the jumper does carona futaba and various other fhss protocol just haven't found the right one yet hoping someone else has already done it and can tell me which one to try Thanks for the quick reply though 4 hours ago, Phil Green said: FHSS is simply a method of broadening the signal, it doesnt define the protocol, Futaba confuse things by calling their 'budget' protocol FHSS, which it is, but FASST also uses frequency hopping. 🙂 Also some manufacturers do 'surface' versions of their protocol... I think all you can really do is to try all combinations! TBH I doubt anything is going to work - if the prototocol had been cracked I ssuspect one of Etronix, Tamco or Code would be listed, but it isn't. The fact htis is a) a low cost system and b) does not have a broad user base suggests to me it is unlikely the MPM supports it. Edited June 6, 2023 by MattyB Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.