Diamond Geezer Posted January 26 Share Posted January 26 Hi all does anyone know if the ikonnik receivers are compatible with the aurora 9 I know they are with my optic 6 but I can’t get them to bind with my aurora 9. Quote Link to comment Share on other sites More sharing options...
Outrunner Posted January 26 Share Posted January 26 Yes they are compatible but you have to switch to Minima bind mode (non telemetry) to bind. 1 Quote Link to comment Share on other sites More sharing options...
Diamond Geezer Posted January 26 Author Share Posted January 26 Hi outrunner how do I do that I have tried all sorts it says turn on power while holding down button on back of module for 2 seconds but I get nothing until I I,push ready to transmit but only get red or red and blue flashing together. Quote Link to comment Share on other sites More sharing options...
Outrunner Posted January 26 Share Posted January 26 I find it fiddly to do and I have to follow the manual instructions but it does work. Make sure you use the latest manual as a guide as they did update it a few times although not for many years now. Hitec Manuals Make sure you have the latest firmware but again it's not been updated for many years as it's now unfortunately a legacy system. Quote Link to comment Share on other sites More sharing options...
extra slim Posted January 26 Share Posted January 26 You need to select transmit with the button in for about 5 seconds. Quote Link to comment Share on other sites More sharing options...
Diamond Geezer Posted January 26 Author Share Posted January 26 I just get red and blue flashing Quote Link to comment Share on other sites More sharing options...
John Tee Posted January 26 Share Posted January 26 Mine work ok with my Flash 8 In one of the menus is the selection of protocls for binding which include the minima one you need for the Ikkonnik as Ourunner says. John Quote Link to comment Share on other sites More sharing options...
Outrunner Posted January 26 Share Posted January 26 When the red light on tx module flashes hold button down for two seconds, should change to blue flash as described in instructions. Quote Link to comment Share on other sites More sharing options...
Diamond Geezer Posted January 28 Author Share Posted January 28 Thanks guys sorted it but what a palaver👍🏽 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.