Foxfan Posted June 3, 2020 Share Posted June 3, 2020 I'm sure you could find a traditional offset litho printer who would have spare sheets, but if not, try K&S Metal Centre's aluminium sheet. It is wonderfully malleable and only slightly thicker than litho plate. Available in most toy/model shops. I have used it to make scoops, blisters and all the more difficult shapes on a 1/12th scale model of the record boat Miss Britain III, no annealing necessary. Martin Quote Link to comment Share on other sites More sharing options...
Robin Colbourne Posted June 4, 2020 Share Posted June 4, 2020 The Airbus A380 used an aluminium/composite laminate called GLARE GLARE - Aluminium/Composite laminate GlLARE gives a lot of the advantages of composites, with the workability of metals. It would be interesting to see what the effect of laminating aluminium foil/drink cans/lithoplate with different materials would be. Edited By Robin Colbourne on 04/06/2020 08:16:07 Quote Link to comment Share on other sites More sharing options...
Eric Robson Posted June 4, 2020 Share Posted June 4, 2020 This is a Hawker Fury I am currently building, the fuselage top from the cowl to the rear of the cockpit is covered with Fosters lager cans the printing is still on the underside. I found it almost impossible to remove. The gun troughs were formed from baking tray aluminium which is the same thickness as the beer cans. rivets were embossed with an 0 gauge locomotive riveter. Quote Link to comment Share on other sites More sharing options...
flight1 Posted June 4, 2020 Share Posted June 4, 2020 you can buy aluminium sheet off ebay look for 0.3mm which is the equivelant to the thicker litho plate used to be 0.15 0.2 and 0.3mm thick . i just remembered you can get sheet from 0.125 to 1.6mm so a good choice from this modelshopuk Quote Link to comment Share on other sites More sharing options...
Graham Crossley Posted June 4, 2020 Share Posted June 4, 2020 The modelshopuk looks very good. Thanks for the link. Quote Link to comment Share on other sites More sharing options...
Alan Gorham_ Posted June 4, 2020 Share Posted June 4, 2020 Graham, the reason for BT specifying litho rather than thin ply or some such to make flaps from is because, due to the thin section of the flap, it is prone to warp over time due to the instability of the wood. This then looks 'orrible when the flaps are up as their trailing edge does not meet the wing trailing edge. Since litho is now hard to find, many people are using laminated epoxy glass sheet known as various trade names around the world such a G10, Fliteskin or ProSkin. Mick Reeves Models in the UK sells it as ProSkin and it is available in many thicknesses to suit. It is a very stable, strong material and would work well for your application, but it is sold in rather large sheets and is not cheap - nor is the postage! Quote Link to comment Share on other sites More sharing options...
Ernie Posted June 4, 2020 Share Posted June 4, 2020 Hi Guys, A possible source for litho late are art schools. Many still use it, and throw away used sheets. Also there is an interesting material called Flite Metal that comes from the US of A. It's easy to find on the web ernie Quote Link to comment Share on other sites More sharing options...
Alan Gorham_ Posted June 4, 2020 Share Posted June 4, 2020 FliteMetal is no good for Graham's application. He wants to make flaps. FliteMetal is a finishing method to replicate a metal skin. It's not a structural material. Edited By Alan Gorham_ on 04/06/2020 13:19:06 Quote Link to comment Share on other sites More sharing options...
Ernie Posted June 4, 2020 Share Posted June 4, 2020 Yes Alan. Of course, My only excuse, is that in my haste to be of assistance, I didn't read the entire thread. ernie Quote Link to comment Share on other sites More sharing options...
Graham Crossley Posted June 4, 2020 Share Posted June 4, 2020 Really appreciate all the advice I am getting guys. Many thanks to all who have posted their ideas. Graham Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.