Chris Dowell Posted February 21, 2019 Share Posted February 21, 2019 Just a bit of a flesh wound. Happy Landings Chris... Quote Link to comment Share on other sites More sharing options...
Steve Jones 2 Posted February 22, 2019 Share Posted February 22, 2019 Fixed worse, that's the beauty of wood.. real modelling rather than Chinese imported RFT.. It was my cruiser which suffered the mid air and was almost cut in half.. a few nights later and... Steve Quote Link to comment Share on other sites More sharing options...
Daniel Cardona Posted February 22, 2019 Share Posted February 22, 2019 Posted by Richard Elliot on 03/03/2016 15:26:32: Well its taken me ages to get to finish my ic powered 1.2x Cruiser but its done I wanted to keep the see through covering theme going that Rich started.....but the only colour left that hadnt been done was yellow......and boy is it yellow!!, so it had to be a Kenny Roberts Yamaha scheme. Now if it would only dry up, warm up and stop blowing a gale............ Rich What engine size is that? Does anyone trief one with a 4 stroke? Quote Link to comment Share on other sites More sharing options...
Richard Harris Posted February 22, 2019 Author Share Posted February 22, 2019 Daniel, I think that the engine fitted in Rich's 1.2x Cruiser is an OS25fp so a 30 size 4 stroke should fit the bill for this enlargement. I have seen this model fly on many occasions and its a very well matched combination. Rich Quote Link to comment Share on other sites More sharing options...
Richard Harris Posted February 22, 2019 Author Share Posted February 22, 2019 Daniel, I think that the engine fitted in Rich's 1.2x Cruiser is an OS25fp so a 30 size 4 stroke should fit the bill for this enlargement. I have seen this model fly on many occasions and its a very well matched combination. Rich Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.