Ton van Munsteren Posted April 24, 2011 Author Share Posted April 24, 2011 Okay than block is not the right word, its a sheet but just a little to big for me, specialy when I want the model as lightweight as I can. To go further on the cowl here is the location for the landinggear. Because of the mod to the cowl the landinggear needed a differant location and will go into the balsa sheet between former F1 and a partly F1. The balsa will get a grove with two vertical holes for the gear wire so it can handle the landing load. F1 is ready to take the cowl and hatch construction, but first we need to make some cad drawings for the parts. Ready to cut some parts. Ton Edited By Ton van Munsteren on 24/04/2011 21:06:51 Quote Link to comment Share on other sites More sharing options...
Peter Miller Posted April 25, 2011 Share Posted April 25, 2011 Interesting. Should be OK if you have a nice smooth landing strip I wonder how much weight it will save over hollowed out soft 1/2" sheet. Quote Link to comment Share on other sites More sharing options...
Ton van Munsteren Posted April 25, 2011 Author Share Posted April 25, 2011 Don't know how much I will save but I gess that it would be easier to find a lightweight 3mm sheet than a 1/2"sheet, it's difficult enough to have good balsa thies days. And than the hollowing out is not my thing always scared of going to far so it stay's to thick. Not hoping that I will get regret designing my own construction and going the more difficult route, the radis underneat is very small so will be a good challange to get the balsa in place. Ton Quote Link to comment Share on other sites More sharing options...
Peter Miller Posted April 25, 2011 Share Posted April 25, 2011 That small radius is no problem, just plank it. Planking will go round any double curvature/ Quote Link to comment Share on other sites More sharing options...
Danny Fenton Posted April 25, 2011 Share Posted April 25, 2011 looks really good Ton, I am always amazed how quickly you just knock something together in CAD The beauty of doing it in cad and using sheeting is the shape is sorted for you and you don't have to get artisitic with the sanding block. I am hopeless at free form shaping CheersDanny Quote Link to comment Share on other sites More sharing options...
Ton van Munsteren Posted April 25, 2011 Author Share Posted April 25, 2011 Peter, Yes the planking is done and was not all that difficult and good fun. Made strips of 5 mm width and soaked them in water and set them in a curve around a tin can. Leaved them to dry overnight and glued them and must say that Iam happy with the result. Danny, Iam having as much fun doing cad then building a model so when its hobby its great time to spend. Must confess your totaly right, same for me being hopeless free form shaping. And having fun doing cad makes for me the choice easy. Is it easier to go this route well not always the drawing was not that difficult but the planking needs some patience, because making a radius in cad is so much easier than making that radius with a strip of balsa. Ton Quote Link to comment Share on other sites More sharing options...
Ton van Munsteren Posted April 25, 2011 Author Share Posted April 25, 2011 Heere the pics from the cowl build ; Drilling a hole for a pin. There will be four to align the top part on the lower cowl part. The top will be removable to acces the Lipo's . Thats it for now have lots more but need to upload them first. Ton Quote Link to comment Share on other sites More sharing options...
Peter Miller Posted April 26, 2011 Share Posted April 26, 2011 Looking very nice. I will say that at the radii involved it is not necessary to wet the wood or preform the curve. My next design for RCM&E (not counting the two on file) will have a fully planked fuselage about 6" wide and 8" deep and 36" long less cowl. I have to say that I have no experience of CAD. I use Compufoil to design my wings but even then I trace the Compufoil wing out on my paper plan. I have to see the design full size on paper. Quote Link to comment Share on other sites More sharing options...
Ton van Munsteren Posted April 28, 2011 Author Share Posted April 28, 2011 For the top it was not needed to wet the wood, but for the lower part it was sure needed. Did make a test with dry balsa stringers but they broke, so I had to soak them in water and prebend. Great to hear you have some more designs waiting to come out any pics to show us. For me making a drawing in cad is fun and I can print anything I want to have the plan fullscale when the model is build. But than again Iam not always using a plan with the construction using tab connections and selfaligning, mostly only some pics are needed from 3D view to build my model. here some more pics of the Tailwind nose. Inside of the hatch Looooots of space. Stringers to make a start on the lowerside of the cowl. Wet and prebend on the Nivea can. Comming along nice not the easiest job but for me good fun. Some more stringers soaked and waiting to be bend. Not bad with a piece of balsa. Waiting to dry. So not bad and happy with the result. Some more pics will follow tomorrow. Ton Quote Link to comment Share on other sites More sharing options...
Matt Halton Posted April 28, 2011 Share Posted April 28, 2011 Lovely build, she's coming along fast there Ton, nice work, the cowling build has gone very well. Cheers Matt Quote Link to comment Share on other sites More sharing options...
Danny Fenton Posted April 29, 2011 Share Posted April 29, 2011 Lovely work Ton, love how that cowl has gone together Quote Link to comment Share on other sites More sharing options...
Peter Miller Posted April 29, 2011 Share Posted April 29, 2011 A very nice, neat job of planking there. My Fournier and Vintage Sandow are on file with RCM&E. My Super Acro is on file at Model World and I have just finished my Dalotel for Model World and am waiting to test fly it. Got at least five more designs lined up on the "To do" list. THis is the Super Acro. 44" span, .25 engine. a little heavier than I like but fully aerobatic. Quote Link to comment Share on other sites More sharing options...
Ton van Munsteren Posted April 29, 2011 Author Share Posted April 29, 2011 Matt, Thanks iam doing me best. Danny, Thanks yes going well with the Tailwind, the DH60 is getting closer by the minute. Peter, Thanks , man do you even sleep and eat with all those designs coming of the board. Just keep on going love you designs and please post some more pics. Specialy interrested in the Dalotel (better send that one to RCME) that one is high on my list is it with retracts and do you have pics of the real plane. Have seen many years ago the model of Chris Foss fly on the Nationals and loved that plane rightaway but foto's are rare on the internet. Know that the full scale is damaged and tucked away in a hangar some ware such a pitty of a plane like that. Some more pics of the Cowl : Ton Quote Link to comment Share on other sites More sharing options...
Peter Miller Posted April 30, 2011 Share Posted April 30, 2011 Very nice cowling indeed. The Dalotel is 55" span and does have retracts. It was scaled from Chris Foss's own 3 views. I have pictures in the camera and will post some later. I also found a website with masses of detail and photos of the bare airframe etc. Dalotel detail and info. I am afraid that it has been promised to Model World. but you should still be able to get the plans when it comes out. Yes, I do sleep, I seem to model and sleep with short breaks to cook my meals. OH, and I don't build as neatly as most people do so that is a bit quicker. Edited By Peter Miller on 30/04/2011 08:47:50Edited By Peter Miller on 30/04/2011 08:49:09 Quote Link to comment Share on other sites More sharing options...
Peter Miller Posted April 30, 2011 Share Posted April 30, 2011 Here are a couple of pictures. I spotted the missing black trim stripe on the tailplane after taking the pictures. also added the yellow cockpit framing. Quote Link to comment Share on other sites More sharing options...
Daniel Cardona Posted May 3, 2011 Share Posted May 3, 2011 wow!! what a great dalotel you made there peter! do you have more photos of the model? Quote Link to comment Share on other sites More sharing options...
Ton van Munsteren Posted May 3, 2011 Author Share Posted May 3, 2011 Thanks for the pics Peter looks realy nice has it been maiden yet. Also thanks for the link of the site some great pics there and most new for me so downloaded them all, will be of good use in the future. So have done some more on the Tailwind here an update ; Some pics for motivation. Have seen lots of Tailwind's on the net with some great colors but most of them had some changes on the plane it self which made it less interesting. Will stick to the version Peter did I like this one the most, so will order some Oracover for the final step very soon. This is how my landinggear sits. This will hold the lading load just fine (I hope) The wire in place which holds the tube for the wing wire. A plywood insurt for the tailwheel which will be stearable. Some more pieces of balsa to smoothen up the frame. The top stringers in place. The Tailwind on its own feed. Ton Quote Link to comment Share on other sites More sharing options...
Peter Miller Posted May 4, 2011 Share Posted May 4, 2011 Not much more n the Dalotel yet. THose were just snaps taken in the garden. It has been too windy for test flying recently . I hope to get some flying shots this week end if the rain holds off a bit longer.. Your tailwind is looking great. Quote Link to comment Share on other sites More sharing options...
Ton van Munsteren Posted May 26, 2011 Author Share Posted May 26, 2011 Iam getting a little bit closer to the maiden with a lots of small things do , which are not my favorite part of the build . I do love the construction build but when it comes to the final part of finishing and mounting the radio it always slows down. Still done some thing so here is a update; Not my favorite material but Depron can sometimes be of good use. Dashboard ready to take a pic of the big one. The tube flatten on the oudsite of the fuse to hold the strut. The kwiklink as per plan wood also work but this is more my thing. Its getting its color already could not wait to start covering. Have some more pics but they will follow later. Ton Quote Link to comment Share on other sites More sharing options...
Peter Miller Posted May 27, 2011 Share Posted May 27, 2011 Hi Tony, Looking great. At last the Dalotel has flown. It flies like a pattern ship, rock steady. Doesn't like outside loops, needs a little more power for them and for sustained knife edge. Otherwise great In a couple of weeks or so I hope to be starting a new build blog of a new model. I think it will bow your mind. Quote Link to comment Share on other sites More sharing options...
Ton van Munsteren Posted May 27, 2011 Author Share Posted May 27, 2011 Thanks Peter. Congrats on the maiden , the Dalotel looks great in the air. Looking forward seeing your new build blog, please tell more. Ton Quote Link to comment Share on other sites More sharing options...
Peter Miller Posted May 27, 2011 Share Posted May 27, 2011 Ton You are going love this one. It makes the Tailwind look like an empty kit box. Well, that is my opinion. Quote Link to comment Share on other sites More sharing options...
Ton van Munsteren Posted May 28, 2011 Author Share Posted May 28, 2011 Hi Peter, Yes thats a nice one, just the thing a like. It has some strange line on the fuse think its not the easiest one to design and build. Will you make the leading edge as it is on the plane. love that cocpit . Ton Quote Link to comment Share on other sites More sharing options...
Peter Miller Posted May 28, 2011 Share Posted May 28, 2011 The cabin and wing mounting may be a bit of a problem, the fuselage shape isn't too bad if you analyse it. I want to do the slatted wing and slotted control surfaces. If one does the LS 50 this does not have the slats so would be simpler. Quote Link to comment Share on other sites More sharing options...
Ton van Munsteren Posted July 7, 2011 Author Share Posted July 7, 2011 Oke we did get a little of topic with the other models from Peter so time for a update. The fuse has the basic color. So on with the elevator with the first step connecting left and right Needs a little senading before covering. To make life easy I placed the servo's close to the tail. To be honest this was done some time ago and did made a little difficult to get the CG on the correct spot, more about that later. Supervisor Charlie is checking every thing Iam doing, but also needs a little break from time to time. Wiring in place for the flap and Aileron servo's Also a block of hard wood in place for the Nylon wingbold. More pics to follow. Ton Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.