DCW Posted June 30, 2016 Share Posted June 30, 2016 Hi all. Some years ago we had an excellent 'one stop' model shop in the Wiltshire town of Warminster. It was called Hobbies and it was run by a well known and distinguished modeller, no name dropping.. he may well read this. Hung up in the ceiling was a CAP Devils Duster, it had been there for some time with no takers. I took pity on it, made on offer for it which was duly accepted. After dusting it off, I fitted new radio gear and an 60 2/stroke. To my amazement it handled and responded beautifully, neutrally stable but still easy to fly. Under power I could fly it at very high angles of attack without stalling and in a light wind landing was almost walking speed. Loops slow rolls etc. could be performed with ease. Stupid like, I sold it, together with the plan a few years ago. Has anyone else had experience with this 'beast' ? Better still does anyone know where a plan could be obtained? Happy landings David Quote Link to comment Share on other sites More sharing options...
onetenor Posted June 30, 2016 Share Posted June 30, 2016 Have you tried all the plans services like Traplet Hippocket Aeronautics, Aerofred Vintage model co ans so on .Also Google for it and advertise on fleabay Amazon etc . ask on other forae too. Quote Link to comment Share on other sites More sharing options...
onetenor Posted June 30, 2016 Share Posted June 30, 2016 Derricks/Dereks plans collection too Quote Link to comment Share on other sites More sharing options...
stu knowles Posted June 30, 2016 Share Posted June 30, 2016 I can't help with the DD but Pete Russells 362 & 363 Deltas are very similar and a straightforward build (there's only a wing!) He fitted retracts to his later versions which would make a very tidy model. The only kits I can think of is the Busa Northstar which is an amazing flier, land or water Quote Link to comment Share on other sites More sharing options...
cymaz Posted June 30, 2016 Share Posted June 30, 2016 Have a look through Outerzone. They have lots of plans...might find something. Quote Link to comment Share on other sites More sharing options...
DCW Posted July 1, 2016 Author Share Posted July 1, 2016 Thanks guys, your comments and advice are very much appreciated. I will continue my search will all of your recommendations. If anyone has built a similar machine I would love to see it. Keep flying, regards. David Quote Link to comment Share on other sites More sharing options...
Former Member Posted July 2, 2016 Share Posted July 2, 2016 [This posting has been removed] Quote Link to comment Share on other sites More sharing options...
DCW Posted July 2, 2016 Author Share Posted July 2, 2016 Hi Percy. Yes you are quite right, they were spectacular both to fly and to watch. I believe that mine was one of a trio flown at model shows in formation. The story goes that one 'pealed off' out of control and one of the pilots said 'your aircraft is gone out of control, Oops it's mine'. Whether there is any truth in that story, who knows... Mine was initially powered by an Irvine 61, later an OS 61. Today I guess I would use a 61 or 70 four stroke to try to keep the noise down, with a tuned pipe it could be heard a mile or so away. The only problem was from 'ground effect' when landing on tarmac. It would float on it's cushion of air long after the elevons had become ineffective. To cure this I would take of on the runway and land on the grass. Being heavily involved with flying wings this is a common problem I have found when landing on a hard surface. David Quote Link to comment Share on other sites More sharing options...
DCW Posted July 8, 2016 Author Share Posted July 8, 2016 Red Duster Quote Link to comment Share on other sites More sharing options...
John Lee Posted July 8, 2016 Share Posted July 8, 2016 Bob Fletcher ('AlphaBob' )with Devil's Duster Woodvale 1975. When Alpha Models was in its heyday we had a Trade Stall and did a variety of displays at Woodvale each year. I never displayed the DD but flew one on a number of occasions. Edited By John Lee on 08/07/2016 21:10:56 Edited By John Lee on 08/07/2016 21:11:37 Quote Link to comment Share on other sites More sharing options...
DCW Posted July 8, 2016 Author Share Posted July 8, 2016 Thanks John. That is one of the 'coolest' pics I have yet seen on the forum. Is that you holding back the Duster, there seems to be quite an audience in the background. I find deltas and flying wings quite fascinating and the DD was very much a favorite of mine. That's why I am looking to build another, assuming the plans are still available. Thanks again David Quote Link to comment Share on other sites More sharing options...
Piers Bowlan Posted July 9, 2016 Share Posted July 9, 2016 It looks like it has a very rounded leading edge and thick section, perhaps this contributed to its enjoyable flying qualities. Do you recall David, if it had a symmetrical wing section? Perhaps you could design something similar yourself in the absence of a plan. It looks like it could be a simple build although the tricky bit could be getting the C of G and wing reflex right. I too have built a few flying wings over the years including a couple of O/Ds. Great picture by the way, do you think that this example has been scaled up? There appears to be an Action Man strapped to the underside! Edited By Piers Bowlan on 09/07/2016 06:26:45 Quote Link to comment Share on other sites More sharing options...
DCW Posted July 9, 2016 Author Share Posted July 9, 2016 Hi Piers. Thanks for joining the thread. Yes. I believe it was a Symmetrical wing section, Possibly a NACA 0015? If I cannot track down a plan I guess that I will have to design and build my own version, but it would be very frustrating after spending hours drawing up and building only to find that my design doesn't quite fly the same or perhaps I am just being lazy? As to the CofG, originally it was well forward and on the first few flights elevator control was poor and the elevons had to have plenty of 'up' trim. It also it flew fast and was not particularly pleasant to fly. I then put ballast aft which brought the CofG into a much better position and never looked back. I think that the elevons provided the reflex, mine could be trimmed to fly 'hands off'' when inverted. I hope that the action man on Bob Fletcher's version had a parachute. I think a parachuting action man was part of the show. Might just try that myself! The size looks about right, (56 inch span). David Quote Link to comment Share on other sites More sharing options...
stu knowles Posted July 9, 2016 Share Posted July 9, 2016 Here's a link to the Pete Russell 363 delta. It has a thinner wing section than the DD but is otherwise much the same. 50" span but easily photo enlarged if you want bigger. In its day a popular design and well proven. **LINK** Quote Link to comment Share on other sites More sharing options...
Bob Cotsford Posted July 9, 2016 Share Posted July 9, 2016 Peter Russell's 363 is a similar delta but with a thinner wing section, and the plans are available on Outerzone. My smaller 362 flies very nicely on a 46LA so I'd imagine the 363 could be a laugh with a cooking 60. Ah! Stu beat me to it! Edited By Bob Cotsford on 09/07/2016 09:30:08 Quote Link to comment Share on other sites More sharing options...
cymaz Posted July 9, 2016 Share Posted July 9, 2016 I must confess I don't have much experience with all types of delta. Though the club vice-chairman scratch built one out of sheets of 1/4 balsa, just a flat wing with a box fuselage to carry radio, engine etc. flies a treat and so docile. Quote Link to comment Share on other sites More sharing options...
DCW Posted July 9, 2016 Author Share Posted July 9, 2016 All very useful info. Incidentally if anyone has built an interesting delta, we would all love to see it. Thanks Guys. David Quote Link to comment Share on other sites More sharing options...
Piers Bowlan Posted July 10, 2016 Share Posted July 10, 2016 Good luck with your search for a plan David, someone must have one stashed in the corner of their loft somewhere. Yes it would be frustrating to design and build your own version only to find that it flies like a turkey, or even worse, for the DD plan to then turn up! Still it could be fun designing your own and who knows, it could turn out better than the original. Personally I would go for a lecky powered version to start with as there is lots of scope for moving the battery about to get the C of G in the right place without adding ballast. It looks like I have talked myself into having a go at building one myself. How did that happen?! Quote Link to comment Share on other sites More sharing options...
KiwiKid Posted July 10, 2016 Share Posted July 10, 2016 Posted by DCW on 09/07/2016 10:27:52: All very useful info. Incidentally if anyone has built an interesting delta, we would all love to see it. Thanks Guys. David This is my Stormfighter2 delta glider built from an RCM plan (#843). Constructed with a built up wing and a lost foam fuse. I tacked a motor on the back and she's a great flier. I thought it looked a bit Mirage-ish so went with that livery and a sort of a TSR2-ish nose. Quote Link to comment Share on other sites More sharing options...
DCW Posted July 10, 2016 Author Share Posted July 10, 2016 Hi Piers. Go for it... I have reigned myself to design and build a super DD. In this case power would come from an ASP 80 fourstroke? Some years ago I converted one of my wings to electric. This was the Pterasoarus based on a Manx Monarch but made to look like a vintage scale aircraft, fooled a few lads. It was originally powered my a vintage OS 60 with open 'rockers', down on power compared with a modern four stroke but still good. Electric conversion consisted of: EMAX GT3526/04, EMAX 80A ESC, and a 4 cell, (14.8v) LiPo This was down on power even compared with a Vintage OS 60. It just takes longer to get off the ground, it is after all a powered glider! I probably should have used a more powerful motor with a 5 Cell, but this would, of course, increase both weight and cost. Perhaps a smaller DD with a 3 cell would be a good idea? After a bit of research last night, I think the closest match for the original wing section could have been an NACA 0010. I think that that is the wing section used on an Avro Vulcan, that's good enough for me. 10 ribs per wing, but maybe the last 2 or three ribs should be NACA 0008. Also slightly larger elevons to increase the rate of roll and a better power to weight ratio to give a more vertical climb. Hope we don't spoil it. Pterasoarus with OS 60, I will upload a 'pic' of the aircraft in it's present guise when I next get to the flying field, whenever that is...... Bye David Quote Link to comment Share on other sites More sharing options...
John Lee Posted July 10, 2016 Share Posted July 10, 2016 Anglia Model Centre took over the manufacturing of Complete a Pac kits, it may be worthwhile asking them if they have anything left. See the penultimate paragraph on this link. Quote Link to comment Share on other sites More sharing options...
DCW Posted July 10, 2016 Author Share Posted July 10, 2016 To KiwiKid. Like your delta, very much. Also reminds me of a Handley Page HP115, another favorite aircraft. Pusher design that's started me thinking. David Quote Link to comment Share on other sites More sharing options...
DCW Posted July 10, 2016 Author Share Posted July 10, 2016 Thanks John for that tip, I have just emailed them. David Quote Link to comment Share on other sites More sharing options...
DCW Posted July 15, 2016 Author Share Posted July 15, 2016 Hi John. I've managed to contact Anglia Model Centre about CAP kits. They have most of the CAP plans, including the Vulcan, but not the Devil's Duster. Back to the drawing board I guess. Thanks David Quote Link to comment Share on other sites More sharing options...
John Lee Posted August 22, 2016 Share Posted August 22, 2016 David I've just had an email from Bob Fletcher (pictured at Woodvale in a post above) to say that he has 'just had a battered yellowing Duster plan sorted out and cleaned up to amazing quality by www.model-plans.co.uk' and so it should be available via that site now. It's not yet showing on their listings but an email to Derick at model-plans should get you on the way. Regards John Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.