Jump to content

third party telemetry sensors


CARPERFECT
 Share

Recommended Posts

Advert


Agreed. SM Modellbau  are very good, and not just for Futaba. I'm using their UnisensE with JR DMSS. But you can set the unit up for many different brands/protocols. It does rpm (brushless electric) altitude, variometer,  batt voltage, current and more from one unit. Only downside is instructions are in German, though translatiions into English can be found online.

By the way, no need to buy an expensive branded lead to programme Unisens from your PC. I found a really cheap item from HK worked fine. See https://hobbyking.com/en_us/esc-pc-software-communication-adapter.html?___store=en_us

Edited By David Ovenden on 18/10/2017 21:20:03

Link to comment
Share on other sites

I don't know about Futaba but there's a gentleman in Finland who has designed a range of DIY sensors based on Arduino Mini processor boards for Jeti telemetry - easy to build and program and at a fiver or so for an altimeter, vario, temperature sensor, rev counter etc. and a tenner for GPS are extremely affordable if you can wield a soldering iron.

There may be similar enthusiasts around designing for Futaba - worth trawling a few newsgroups and googling?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...