keith whitfield Posted August 28, 2020 Share Posted August 28, 2020 Please help I am building a supermarine walrus, and looking for 1/8 scale vickers K gun, any suggestions? Quote Link to comment Share on other sites More sharing options...
Denis Watkins Posted August 28, 2020 Share Posted August 28, 2020 Posted by keith whitfield on 28/08/2020 10:48:33: Please help I am building a supermarine walrus, and looking for 1/8 scale vickers K gun, any suggestions? Inwood Models **LINK** Quote Link to comment Share on other sites More sharing options...
Bob Cotsford Posted August 28, 2020 Share Posted August 28, 2020 How much do you want one? How about a bit of 5 and 6mm balsa, some 1/8 dowel or ali tube and a pot of gunmetal grey paint? It's not hard to produce a reasonable facsimile. Quote Link to comment Share on other sites More sharing options...
Colin Low 2 Posted August 28, 2020 Share Posted August 28, 2020 Just Type 1/8 scale Vickers machine gun into google or similar. Several come up around £13 As an aside I spent 10years making the fuselage of a real Walrus W2718 for Dick Melton avaition! Which I believe was last seen as Duxford. Quote Link to comment Share on other sites More sharing options...
Bob Cotsford Posted August 28, 2020 Share Posted August 28, 2020 Keith is asking about the WW2 Vickers K model (looks like a Lewis gun), not the WW1 type with the water cooled barrel. Quote Link to comment Share on other sites More sharing options...
Richard B (DB Sport and Scale Ltd) Posted August 28, 2020 Share Posted August 28, 2020 If you send me an email with a photo (because there's always little differences) I will draw it and print it for you although it might take a little while. It'll cost the same as the other 3d printed items I've drawn and are available from the website. I won't put a link in case I contravene anything but search for DB Sport and Scale to see the 3d print section and to the get email address. Contact is better via email as I'm rarely by the phone. Quote Link to comment Share on other sites More sharing options...
Stephen Smith 14 Posted August 28, 2020 Share Posted August 28, 2020 There's a few on thingyverse, there must be someone in you club with a printer, pick the one you want and get them to scale it in the slicer then print it, you may not understand but anyone with a printer will Quote Link to comment Share on other sites More sharing options...
stu knowles Posted August 28, 2020 Share Posted August 28, 2020 Do tell more about the Walrus please! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.