alan p Posted September 28, 2021 Share Posted September 28, 2021 Following with interest I have a Flash 7 set that decided to stop binding. Quote Link to comment Share on other sites More sharing options...
Steve Houghton 1 Posted September 29, 2021 Share Posted September 29, 2021 I've never had a problem with mine but a friend bought a new A9 just under a year ago, (old stock) and a couple of months ago had a fault losing signal. It turned out to be the module was faulty. He managed to get a replacement FOC under warranty and it's working fine now. Quote Link to comment Share on other sites More sharing options...
Alan Gordon 5 Posted September 29, 2021 Author Share Posted September 29, 2021 (edited) Thanks Steve, I8 was coming to that conclusion I only used it once and had to store due to Covid, it simply wont bind now. So I reckon it is the Tx or the Module. I am going back to 35 mg Edited September 29, 2021 by Alan Gordon 5 Quote Link to comment Share on other sites More sharing options...
Keith Berriman Posted September 29, 2021 Share Posted September 29, 2021 Try Radio model workshop the owner Mike is very helpful guy. He put my dropped Flash 7 through the system and all was okay I have had on old optima Rx that will not bind from my old Flash 6 days on 2.4 module Quote Link to comment Share on other sites More sharing options...
ken anderson. Posted September 30, 2021 Share Posted September 30, 2021 (edited) Alan, the only other reason i can think of what is wrong is ....... the TX module needs an update/refresh of its firmware and so does the RX,i bought a 2nd hand TX module that hadn't been used for a while and it wouldn't work with my rx's until i updated its inards.you need the Hitec HP 22...that plugs in between your pc and TX to do it.....that really is all i can think of...why you are having no luck. Google the subject, you'll see what i'm talking about. ken anderson...ne...1..HP 22 dept. Edited September 30, 2021 by ken anderson. too many 2's Quote Link to comment Share on other sites More sharing options...
Alan Gordon 5 Posted September 30, 2021 Author Share Posted September 30, 2021 A big shout out to J Perkins Distribution, The issue I had with binding my Aurora 9 has now been resolved thanks to advice and help from their service department, Excellent service. ( I have no connection with this company apart from being a very happy customer) 1 Quote Link to comment Share on other sites More sharing options...
Outrunner Posted September 30, 2021 Share Posted September 30, 2021 Good result. It's great to hear that support is still given for the Aurora TX, I really like my Aurora and I hope it will last many more years. What was causing the problem? Quote Link to comment Share on other sites More sharing options...
alan p Posted September 30, 2021 Share Posted September 30, 2021 1 hour ago, Outrunner said: Good result. It's great to hear that support is still given for the Aurora TX, I really like my Aurora and I hope it will last many more years. What was causing the problem? Good result Like Outrunner what was the remedy? may solve my Eclipse pro 7 problem. Quote Link to comment Share on other sites More sharing options...
ken anderson. Posted September 30, 2021 Share Posted September 30, 2021 yeehaa.. ken anderson...ne..1...celebration dept. Quote Link to comment Share on other sites More sharing options...
Diamond Geezer Posted September 30, 2021 Share Posted September 30, 2021 Alan what was wrong with it 1 Quote Link to comment Share on other sites More sharing options...
Andrew Calcutt Posted September 30, 2021 Share Posted September 30, 2021 Should be ok,I have a couple of Aurora 9 x I have been using for years,never had a problem. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.