Ted

Hi all, I had problems with win7 because of screen resolution the given w10 would not work then I found Gavin Mack's post on page 2 use at own risk but I am in Australia and it worked. Regards to all, Ted

"Old codgers indeed, We'll show 'em as soon as we get the engine started!

Martin, The duff wire is from the battery to input on esc if that goes it's not dead stick because everything will be dead. Ted

Bob, If you read Cymaz again Puffin do make a silencer for a 35 Petrol. Ted

Masher, What happens if the voucher is not accepted at the show? Technically its a 'stand' not a shop. A situation like this is where everyone suffers, I try to give cash rather than vouchers for this very reason. Vouchers are not always accepted. What has happened to the saying I was taught when I worked as a grocer, "The customer is always right." Ted.

Colin I copied and pasted into word your build instructions and they are a little more readable. Ted

Hi! according to internet APC have quite a range of pusher props. Ted

I think perhaps port aileron is pinned on stbd wing? Hopefully anyway. ted

Hi David, if you do a search on "Irvine tutor", you will find some information on a conversion to electrifly your tutor. Ted

Hi Birgir. Super bird. We could not be further apart but welcome from Australian Modelers. Ted

Hi David, Imax make a Quatro 4 at once lipo charger as do Hitech. I use a motorcycle size 12 volt battery and charge it with a normal battery charger that I use for my Nissan Patrol battery. Like a lot of others I only charge single batteries the reason is that I don't fancy being around when 4X3S lipos go up in smoke. Ted.

BEB what a masterpiece! Chris has it right, sand the inner to the ribs, sheet wing and finally fit, glue and sand leading edge to profile. Keep up the good work, Ted.

Sorry Adrian, out runners don't go in ducted fans you need an inrunner matched to the fan. Ted

Masher welcome to the "Utterly confused" post. Nobody but Erflog knows what it is that he is trying to say so don't worry about it, no one else is. Ted

CS, And so say all of us! Ted

Hi! searching Hobby King and the forum under "Bixler" I found that the motor ordered by another buyer was 2826-6 2200Kv length 41 mm. with the 2822 motor there is a long and short, with the short being 22mm in length, perhaps you've received a short motor?? Ted

Hi Mathew You could contact Tim Calvert at Model Markings, maybe if you could cut them out he could sell you copies. I sent him photos and it just happened that he was making the same model and he made mine by sizing them against his model. Just check with him, it would be a shame to spoil a good model with bad markings. If soap and water won't clean them then I can't think of anything that will because they are usually sprayed with something after applying, and what will remove that will remove the markings also. Ted

BBC, in a word No cannot be used for open structures as it will 'droop' into any opening. for suitable supplies you could try -Con Coat Composite Supplies, Munibung Road, Cardiff, 2285, NSW. Regards Ted Edited By Ted on 12/06/2013 07:15:15

Welcome Chris, Just put "decals" in keyword search block above and you will see postings where people have tried to make their own some successfully some not so. The advantage of this is it saves time experimenting. Cheers Ted.

Spikey, do a search on the forums for "mini tyro" and you will get pictures of build which would help you. Ted.

Steve Now thats not the right attitude for Your body does not run on IC but electrickery! Ted

If i am reading correctly I can only see a linear Voltage regulator which has a max voltage of 10 volts being cooked by a 6S Lipo. I use a voltage regulator with a 2S battery in place of a flight battery to run bench tests. But the LVR is discarded for a ubec wired into the main 5S battery for flight. Ted

Hi Danos, Hobby King are selling a foam glider with : 2621-1100 motor, 8"x5" folding prop and a20A ESC, already to fly. So you should be OK. Ted

Hi Rusty and welcome, Seagull's E-Pioneer is recommended in RCME's Flight School. Forget the dirty smelly stuff and go for clean and quiet electric power. Ted

Hi All you eskimos, A lovely day today the temperature has dropped to around 27C from the 36's we have been having since Xmas. What is snow but frozen rain. Luckily we don't get it. Come to think of it we don't get much rain either. Ted.