Peter Garsden Posted January 30, 2015 Author Share Posted January 30, 2015 I won't be using any glue Mark. I will cover the jets and the fuselage in fibreglass separately then dissolve the foam with acetone, leaving three hollow shells. Then I will glue the jets to the fuselage with either epoxy or super crylic which I have got on order - or possibly gorilla glue. I may cover the jets before gluing to make it easier with the Solarfilm. So the blue foam is just a one off mold which will disappear on the inside leavng a mouldie effectively. All will be revealed in due course. Quote Link to comment Share on other sites More sharing options...
Mark Kettle 1 Posted January 31, 2015 Share Posted January 31, 2015 Oh I see, I'm looking forward to the next episode Peter. Quote Link to comment Share on other sites More sharing options...
Peter Garsden Posted January 31, 2015 Author Share Posted January 31, 2015 Well today's job was to cut out the tricky shape made by the wheel bays under the fuselage. I had made a template, drew the shape and marked it out ready for cutting Quote Link to comment Share on other sites More sharing options...
Peter Garsden Posted January 31, 2015 Author Share Posted January 31, 2015 I have done a picture of the hot wire pen I used. I made a piece of nichrome wire the right length for the cut out, and roughly scooped it out. I also show a picture of the transformer I made. I have ordred a 24volt transformer and am getting rid of my 12v transformer from inside the box if anyone is interested. Quote Link to comment Share on other sites More sharing options...
Peter Garsden Posted January 31, 2015 Author Share Posted January 31, 2015 This is the transformer Quote Link to comment Share on other sites More sharing options...
Peter Garsden Posted January 31, 2015 Author Share Posted January 31, 2015 This shows the basic scoops taken out ready for sandng Quote Link to comment Share on other sites More sharing options...
Peter Garsden Posted January 31, 2015 Author Share Posted January 31, 2015 And the sanded finished jets ready for covering in brown parcel tape. The point is that it doesnt have to be millimeter accurate because it is the insde of the mould not the outside Quote Link to comment Share on other sites More sharing options...
Peter Garsden Posted January 31, 2015 Author Share Posted January 31, 2015 I have cut out the balsa parts I need from the printed page no 2. I don't need a lot of them so I have pieced some together on one sheet. I have used a fantastic method of putting the plan upsid down on the wood, and rubbing it with a cloth soaked in celluose thinners which rubs the ink through onto the wood. Fantastic and much quicker than other methods I have used. Quote Link to comment Share on other sites More sharing options...
Phil Cooke Posted February 1, 2015 Share Posted February 1, 2015 Nicely sculpted intakes Pete, you've got to be happy with them! The rest of the fus should be a doddle in foam now you've got that bit cracked... parcel tape at the ready!? Its a foam party! Quote Link to comment Share on other sites More sharing options...
Peter Garsden Posted February 1, 2015 Author Share Posted February 1, 2015 Well tonight we have cut out the fuselage, or rather the side templates as the top and bottom templates were done on Thursday. Keith said I shouldn't admit this but, I decided I wanted to be honest. We actually had to cut the sides twice, as a I realised when I had finished that the templates were back to front. I glued the existing top and bottom together with spray 3M contact adhesive, which I will use to glue the fibreglass matting to the mould before wetting it. We then cut it again, whilst I was cursing like mad. So if you look carefully enough you can see the join. It is hard to recognise as the shape of a Tornado.,but there is a lot of sculpting to do. Quote Link to comment Share on other sites More sharing options...
Peter Garsden Posted February 1, 2015 Author Share Posted February 1, 2015 As it looks so unlike a Tornado I placed the jets next to the fuselage so you can get some idea of where we are going, hopefully, tomorrow. Quote Link to comment Share on other sites More sharing options...
Andy Meade Posted February 2, 2015 Share Posted February 2, 2015 Proper job Quote Link to comment Share on other sites More sharing options...
Steve McLaren Posted February 2, 2015 Share Posted February 2, 2015 Ah the not so pointy version of the tornado! Fascinating stuff Peter. But a serious question - I'm trying to figure out why you haven't cut it a bit sharper at the front? Perhaps all will be revealed in the next installment? Quote Link to comment Share on other sites More sharing options...
Peter Garsden Posted February 2, 2015 Author Share Posted February 2, 2015 Good question, Steve. It is because I am going to finish the fibreglass at F1. The accepted method is to use a balsa nose which I am going to stick to F1, which I think I will make out of ply rather than balsa. The point is that it is diffiicult to wrap fibreglass round sharp corners. I tried with the Alpha Jet I made, and it was a mistake. Basically I will take the cloth beyond the end of the corner then cut it off flush and clean. Anyway, tonight, I have started shaping the blue foam with a Japanese saw and Permagrit sanding blocks and files. I have made templates for F1, the jet ends, and outside parameteres of the outside of the formers from the formers Alan drew for me wiith the outside diameters shown. Excellent.. This way I can get the shape right. Quote Link to comment Share on other sites More sharing options...
Peter Garsden Posted February 2, 2015 Author Share Posted February 2, 2015 Edited By Peter Garsden on 02/02/2015 22:17:17 Quote Link to comment Share on other sites More sharing options...
Peter Garsden Posted February 2, 2015 Author Share Posted February 2, 2015 One of the trickiest part of the shaping, is getting the curve up to the canopy right so it fits properly. So I drew an outlind of the base of the cockpit. Quote Link to comment Share on other sites More sharing options...
Peter Garsden Posted February 2, 2015 Author Share Posted February 2, 2015 Quote Link to comment Share on other sites More sharing options...
Andy Meade Posted February 3, 2015 Share Posted February 3, 2015 Is that a Japanese Saw in the last pic Pete? Looks fancy! I'd really like to build a double-sized Me262 with a glass fuselage at some point before 2016, and would like to use this method. Quote Link to comment Share on other sites More sharing options...
Peter Garsden Posted February 3, 2015 Author Share Posted February 3, 2015 It certainly is a Japanese saw - just brilliant for cutting foam if you go for the finest tooth version. Re fibreglass - as most of the mouldies are made out of it, you have to develop the art I think. Also I don't think it weighs much more, and I am convinced it is quicker, and simpler, and stronger in a bump. Anway tonight I have been carving and sanding. I think we are nearly there ready for wrapping in brown parcel tape Quote Link to comment Share on other sites More sharing options...
Phil Cooke Posted February 3, 2015 Share Posted February 3, 2015 Looking good Pete. Familiar shape coming on very nicely!! Quote Link to comment Share on other sites More sharing options...
Peter Garsden Posted February 5, 2015 Author Share Posted February 5, 2015 Tonight I only had about half an hour so have trimmed up the fuselage sides to meet the canopy, and done a bit of fiddling. I have done a mock up with the balsa nose taped on to see what it will look like, and it is looking more like the finished article. My Permagrit files are really coming in handy for shaping and sanding the foam. Still need to do more work on the join between the rear of the jets and the fuselage, then it will be parcel tape time with a Solarfilm iron. Edited By Peter Garsden on 05/02/2015 01:13:57 Quote Link to comment Share on other sites More sharing options...
Phil Cooke Posted February 5, 2015 Share Posted February 5, 2015 Very nice. Interested to see how you tackle the next steps this is all new to me... how will you tackle behind the air intakes for example?? Looks like you are pretty handy with your Permagrits you've got the shape down lovely! Quote Link to comment Share on other sites More sharing options...
Steve Houghton Posted February 5, 2015 Share Posted February 5, 2015 Peter, I've been following your build with interest. I have the Paul Janssens F4U Corsair plan waiting in the wings, which uses the lost foam method. A couple of questions, if I may: - You mentioned getting 'special' drawings of the formers from Andy. Are these reduced in size to allow for the thickness of the fibreglass around them, or do you just mould the fuz slightly larger than the balsa version would be? - How do you line up the fuselage formers on each side of the foam to be parallel before cutting? Is this an eyeball job, or is there a trick of the trade? Regards, Steve Quote Link to comment Share on other sites More sharing options...
Peter Garsden Posted February 5, 2015 Author Share Posted February 5, 2015 Great that you are taking an interest chaps, thank you. Phil - when you say behind the air intakes, I think I understand your question. I am going to mould the air intakes separately, leave the front and back open so they are hollow as indeed will be the insides so they are like a hollow piece of fibreglass with the inside open. At the front I will recess a piece of balsa like you have done with the air intakes to provide a step if you like and block it up. At the back, I will leave the front of the rear section open as well as the back of the jet. I will then use super crylic glue (good for fibreglass apparently, and new to me) to attach the completed air intakes to the fuselage, and put a piece of tape over the rear join so it looks like one piece if you get me. I will leave the underneath join as a seam as I think it was meant to be an opening door on the full size. You will see when I get to that bit. I have been puzzling over the flat sheeting in between the wings. I have decided to glue a strip of 3mm balsa along the inside edge of the top of the air intake on each side as a support and glue a piece of balsa across as per the plan rather than attempt to do it in fibreglass. Steve - yes indeed Paul Janssen - that was where I got the Alpha Jet plan. I looked at the Corsair. The special drawings extend the formers to the outside of the fuselage and show the whole shape including the exterior sheeting rather than the cut down versions on the plan. I can thus gauge properly the correct outside shape, and sand the foam accordingly if that makes sense. I didn't do the same with the Alpha Jet because the plan catered for a lost foam method, as will your Corsair and give you the correct drawings. If it doesn't fit properly, I will adjust to fit, and probably use my handy shaping tool, which I mentioned in my Hawk blog with a photograph. I don't know what the correct name is. Lining up the formers - not really important as they are being glued to an outer rigid shell. It really doesn't matter, but I will probably use the template again, mark the position of the formers and line them up each side that way. I will use the same method to mark the position of the wing and tailplane and fin slot. Tailplane hole will be a bit tricky. I am also a bit worried about how I will get the tailplane pivot into position. I may have to saw off the air intakes then re glue them into position - might use F8 if I do. It is all a work in progress to be honest but quite a lot of head scratching. I am not inserting all the formers just F1 - supports the nose, F2 - forms the start of the cabin, F3 or F4 can't remember which - in front of the wing, and F 6 behind the wing. I am not bothering with F7 and F8 as I couldn't glue them in anyway, and the would only add weight. The fus will be strong enough without them. Hope all is clear? Edited By Peter Garsden on 05/02/2015 14:10:33 Quote Link to comment Share on other sites More sharing options...
Andy Conway Posted February 5, 2015 Share Posted February 5, 2015 Hi Peter very interesting how you are going about this lost foam version, I also will be doing a GR1 version in foam but not the way you are doing it as this will be for EDF/PSS so most of my foam stays with the the model. As the output duct will be bifrucated from a single fan as per the HK. Sea Vixen. But will continue to watch with interest. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.