Spektrum AR 620 RXs

[john stones 1 - Moderator]

Clubmate considering using them. Opinions ?

**LINK**

[Shaun Walsh]

I bought one not long after they came out, it's on the side of a Hobbyking Hummer, exposed to spray from the wheels It's often wet when I land, never missed a beat.

[Colin Carpenter]

I am using one in a Sebart . About 40 flights so far- all good ! Colin

[Paul Marsh]

I've been using the 410 and the 620, no problems, but if using a DX8 Gen1 with 620 and 410's make sure you use the later versions with the DSM logo on it, as I found out during (and on this forum) if doing a power cycle test, the rx doesn't re-establish link with the rx, so a power dropout in the air on a DX8 gen 1 tx, would cause a lock out and crash.

Edited By Paul Marsh on 24/11/2020 18:12:47

[Robert Parker]

I also have been using both the 410 and 620 since they first came and the only issue I had was when trying to use dual receivers in a model, (one in the wing and one in the fuselage as the model had a parasol type wing so I had to revert to the older spektrum receivers), otherwise, they are bulletproof.

I'm using a DX9 Black Edition radio.

Regards

Robert

Edited By Robert Parker on 24/11/2020 18:21:39

[john stones 1 - Moderator]

Thanks fellas.

[leccyflyer]

Love 'em - just to get away from those awful bind plugs makes the worth their weight in gold and they are so neat and tidy to install.

[John Robertson 3]

I have a number of 410 and 620 rxs. I fly at a problematic site as far as DSM2 and DSMX is concerned but these models seem to have overcome the "Holds" which used to plague me. I still get "Fades" as reported in the telemetry but have had absolutely zero "Holds".

[john stones 1 - Moderator]

Another question please, mate says he's using a JR DSX 9 Tx, it all compatible ?