Pusher Props for Multiplex Twinjet?

[Edgeflyer]

Setting up my brushed 480 motors in a Multiplex Twinjet.I need APC ELECTRIC PUSHER PROPS 6X4 for a twin multiplex Twinjet with the motors running one CW when looking from the tail of the model IE at the prop. The other runs CCW . I can find reverse rotation but not normal rotation pushers. Any ideas where to get these or should I just run both motors in reverse?

[Outrunner]

I used to run both motors the same direction using Gunther props on backwards for pusher mode on my Twinjet, worked well.

[Shaun Walsh]

35 minutes ago, Edgeflyer said:

Setting up my brushed 480 motors in a Multiplex Twinjet.I need APC ELECTRIC PUSHER PROPS 6X4 for a twin multiplex Twinjet with the motors running one CW when looking from the tail of the model IE at the prop. The other runs CCW . I can find reverse rotation but not normal rotation pushers. Any ideas where to get these or should I just run both motors in reverse?

You need a pusher on the motor that runs CCW and a normal prop on the one that runs CW (both rotations as seen from the drive end of the motor).

[John Lee]

Steve Webb are showing both tractor & pusher APC 6x4 in stock:

 

https://stevewebb.co.uk/index.php?pid=APCLPB06040E&area=PROPS

 

https://stevewebb.co.uk/index.php?pid=APCLPB06040EP&area=PROPS

[Edgeflyer]

That's excellent thanks for your help. 2 of each type ordered to keep spares or options open.

Well done Steve Webb! Cost less for four with post than a drive to a model shop.

[Edgeflyer]

Shaun 

Thanks for clarifying that. I assume the normal prop on the CW motor has to be put on the hub "backwards" so that it thrusts to the rear.

I've never really used rear motors before!

[leccyflyer]

The lettering on the props faces forward, even on a pusher.