noba Posted June 30, 2015 Share Posted June 30, 2015 Hi has anyone used Emax servos as sold by Airtek Hobbies if so would you please let me know what you think of them. Thanks in advance for any replies. Quote Link to comment Share on other sites More sharing options...
Stevo Posted June 30, 2015 Share Posted June 30, 2015 Yes I have and no they aint a problem Quote Link to comment Share on other sites More sharing options...
Keith Berriman Posted June 30, 2015 Share Posted June 30, 2015 I can confer with Stevo I have a mixture of 9 gr standard and metal gear analogue no problems at all Quote Link to comment Share on other sites More sharing options...
Dave Bran Posted June 30, 2015 Share Posted June 30, 2015 Not bought from Airtek, but have used EMax servos of differing sizes for quite a few years and on planes and EP helis that are frequently used. They have been fine. (Giant Cod, I miss you........!!!) Quote Link to comment Share on other sites More sharing options...
Steve Colman Posted June 30, 2015 Share Posted June 30, 2015 Ditto the above replies! Quote Link to comment Share on other sites More sharing options...
Phil Green Posted June 30, 2015 Share Posted June 30, 2015 Yep Quote Link to comment Share on other sites More sharing options...
Phil May Posted June 30, 2015 Share Posted June 30, 2015 Yep, and no problems.... Quote Link to comment Share on other sites More sharing options...
Frank Skilbeck Posted June 30, 2015 Share Posted June 30, 2015 +1 from me, I use them all the time, only problem is that they aren't always in stock Quote Link to comment Share on other sites More sharing options...
Area 51 Posted June 30, 2015 Share Posted June 30, 2015 Yes I can agree with other comments here on the Emax servos, all good and I have analogue and digi mini's with metal and plastic gears.. variety of installations and all working nicely.. AIRTEK I can also recommended, register for weekly emails, they do offer the servos at a discount once in a while! Quick service too.. Get them bought. Quote Link to comment Share on other sites More sharing options...
noba Posted June 30, 2015 Author Share Posted June 30, 2015 Have bought both Futaba and Hitec servos during the last few months been disappointed with both i have Futaba servos i bought in the 80s they still work better than todays Futaba. Looks like Futaba quality is not what it used to be so shall now be buying Emax so many positive comments for the servos on here. Thanks everybody. Quote Link to comment Share on other sites More sharing options...
Pete B Posted June 30, 2015 Share Posted June 30, 2015 +1 on Emax - been using the ES08A and ES08MA for quite a while without issues Pete Quote Link to comment Share on other sites More sharing options...
Mike Blandford Posted June 30, 2015 Share Posted June 30, 2015 Posted by Dave Bran on 30/06/2015 18:17:53: (Giant Cod, I miss you........!!!) EMAX servos available from: **LINK** Also, keep an eye on: **LINK**. Graham from Cod/Shark has started this and so may have EMAX servos later, he is building up. Mike. Quote Link to comment Share on other sites More sharing options...
Martyn K Posted July 1, 2015 Share Posted July 1, 2015 Low cost and (for a budget servo) I find them better than the size/spec comparable Turnigy. Very smooth progressive operation. Not bad for a budget servo. I (think!) bought mine from GS and have used them for over 12 months - no problems. Not a huge sample though Martyn Quote Link to comment Share on other sites More sharing options...
Bill_B Posted July 1, 2015 Share Posted July 1, 2015 No probs as yet with any of mine. I have some of the early 9g ones, and the newer slimline digital ones too. Great service from here too. LINK Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.