Allan Bennett Posted October 10, 2018 Share Posted October 10, 2018 I've recently needed to do some aerial photography (searching for a lost fixed-wing model) so I attached my Canon Ixus pocket camera to my scratch-built 450-size quadcopter and set it to record video. Even though I tied it down with elastic, on a 12mm bed of soft foam, the result was not impressive due to vibration, but was just good enough to show that the lost model was not in the bramble patch that we had been unable to penetrate on foot. But that exercise has given me the urge to get a 'proper' camera for my quad. I believe that some 'sport' cameras have built-in vibration compensation, but is it good enough to cope with high-frequency vibration rather than just the jogging of someone wearing it on their helmet, for instance? And what kind of anti-vibration mount can I get, assuming that for the moment I just want to have it facing vertically down from the quad? Quote Link to comment Share on other sites More sharing options...
Former Member Posted October 11, 2018 Share Posted October 11, 2018 [This posting has been removed] Quote Link to comment Share on other sites More sharing options...
Piers Bowlan Posted October 11, 2018 Share Posted October 11, 2018 Perhaps a silly question Allan but did you balance the props of your home made quad? Also, possibly the foam was exacerbating the vibration rather than damping it? Did you fly the camera without the foam for comparison? I would take a look at quad and FPV websites to see what other people are using regarding camera mounts, if you haven't done so already. Maybe your ixus camera is just not suited to aerial photography (shutter speed?). The only aerial photography I have done was when I velcroed my Mobius Action Cam onto the wing of my Radian Pro XL, with surprisingly good results (no 'gelo' with the motor running). I mounted the camera out on the wing so I wouldn't get the 'venetian blind' effect from the prop. Of course it was an e-glider not a quad so I guess vibration is more of an issue maybe with a multi-rotor. I am glad your camera was able to show where the lost model wasn't, hopefully your next attempt will show where it is! Quote Link to comment Share on other sites More sharing options...
Allan Bennett Posted October 11, 2018 Author Share Posted October 11, 2018 Thanks for your replies. The props were balanced, and the vibration is not enough to be felt, or to cause any problems with the flight controller or GPS system. My first attempt was with a very thin (about 2mm) foam bed, with the camera secured by a zip-tie. Almost un-viewable. My second attempt was with thicker foam (about 10mm) and the camera secured by a rubber band. Viewable but fuzzy. My camera is not designed for aerial photography, and has no stabilisation. I had it recording video, but apart from it having auto-focus I don't know what it's other parameters are. On the BangGood site the Mobius action camera looks like the kind of thing that would get me started, but I can't see anything about whether it has any kind of stabilisation, either on the BangGood site or on the Mobius site. I suppose since it's so popular, and a good price, I should give it a go, and then fiddle with my mountings etc. if the quality is not good enough. Quote Link to comment Share on other sites More sharing options...
Peter Miller Posted October 11, 2018 Share Posted October 11, 2018 I have seen some really impressive results from a Mobious camera which does video or still. they are not expensive, very tiny and better than the GOPro that I tried. You Ixus should have provided really good results. too Below is a Mobious still from a video Quote Link to comment Share on other sites More sharing options...
Andy Meade Posted October 11, 2018 Share Posted October 11, 2018 I used to use a GoPro on a bed of yellow push-in ear defenders - the type that you can squash then they form inside the shape of your ear. These worked really well. I'm not sure looking for a camera with stabilisation is the answer - that may remove aberrations of sudden jerks, but not "jello-vision" produced by a vibrating airframe. If you can make a sub plate to mount the camera, strap it tight to that, then have the sub plate mounted to your quad's frame with either the yellow ear defenders or this type of isolation mount, I think you'll be pretty close. Good luck A quick edit to add - they are wayyyy overpriced in that link I posted, they are usually a few quid for half a dozen - sorry it was the first link I found, but hope you get the idea. Edited By Andy Meade on 11/10/2018 09:20:54 Quote Link to comment Share on other sites More sharing options...
Gordon Tarling Posted October 11, 2018 Share Posted October 11, 2018 Built in camera stabilisation is designed to deal with lower frequency vibrations, such as hand shaking. For the higher frequency vibrations in most models, you're usually better with it turned off and using mechanical means to cushion the camera from the vibration. Soft mounting can be successful, but sometimes a fair bit of 'tuning' can be required in order to get good results. I have two Mobius cameras and a Gitup F1 which are used exclusively for aerial photography. I am currently getting excellent results from my Mobius Mini that is rigidly mounted on my tricopter. There's often a lot of trial and error involved in order to get decent shots. Quote Link to comment Share on other sites More sharing options...
Steve Colman Posted October 11, 2018 Share Posted October 11, 2018 I'll offer another vote for the Mobius. I have 3 now (the original, a V2 and a Mini ) and they all give good results in a variety of situations. I do agree with Graham above for the need to fine tune the mounting when used on a multiritor. Things seem to be much less critical on fixed wing models. Quote Link to comment Share on other sites More sharing options...
Allan Bennett Posted October 11, 2018 Author Share Posted October 11, 2018 Andy, yes £42 for four blobs of blue silicone (or whatever) is pricey! But I understand the principle, and will probably devise a Mobius setup utilising something cheaper but similar. (In fact, I'm sure I've got four of those things from a previous 250 quad frame, so I'll have to search for them.) That's if rigid mounting, as related by Gordon, doesn't work. So, it's camera first, and then trial-and-error with the tuning of quad and mount. Despite my props being balanced, I've noticed that the adapter hubs supplied with the props (for different size motor shafts) were not a tight fit in the props, so I've sorted that with a bit of tape wrapped around them. Quote Link to comment Share on other sites More sharing options...
Bonzo Moon Posted November 28, 2018 Share Posted November 28, 2018 I don't know how big your quad is but I have tried various cameras on my drone. Currently favourite is a Firefly 7S camera on my much modified Bayangtoys X21. (There's no way I'm going to shell out hundreds of pounds for a Mavic Pro!( I also added a motorised gimbal. Firefly Q6 also has great quality 1080 video. It's smaller and lighter than a 7s. Similar size to a Mobius. Cheaper still. Matecam X1 and GitUp Git2 are also excellent. There's aerial video from them on my channel too. I tested all of these cameras are on my YouTube channel, plus there's a lot more aerial video too. https://www.youtube.com/channel/UC_lM_-wLmDEAdOkZ-_LbZww?view_as=subscriber Costs? x21 probably £130 nowadays. 2 gps. Good position hold. RTH . failsafe etc. Firefly 7s will also do FPV. £60 And gimbal was £30 (though I ended up paying duty on it Here's one of my aerial vids. Edited By Bonzo Moon on 28/11/2018 11:03:13 Edited By Bonzo Moon on 28/11/2018 11:19:02 Quote Link to comment Share on other sites More sharing options...
Bonzo Moon Posted November 28, 2018 Share Posted November 28, 2018 I know in the past my other personal flying videos have gone down well on here, here's one from late summer. (I have a motor now!) This time the SJCam SJ7 Star action camera. I was hand holding the camera, so a bit shakey at times! 3,000 feet asl. Great views. Quote Link to comment Share on other sites More sharing options...
Peter Miller Posted November 28, 2018 Share Posted November 28, 2018 I have been using cameras mounted on models since the 70s. The first was a clockwork drive Robot Star, Pin sharp results. Mount the camera on a bed of foam rubber held so it can flop about. Use a shuuter speed of over 1/500 sec. Most modern digital cameras will have much faster shutter speeds. Use ISO 400 setting, I used to use Ilford HP3. My Canon compact takes great shots. The digital camera needs contrast for the autofocus to work. Very even colour fields is not helpful Always shut down to tick over before triggering the camera. With film cameras there was no autofocus. I got great results with the first Canon Sureshot autofocus film camera. I used that to get good shots of Flag Fen when I few for Blue Peter back in about 1982 Quote Link to comment Share on other sites More sharing options...
Martyn K Posted November 28, 2018 Share Posted November 28, 2018 If this video was taken in September 2018 then at 3000ft above take off height then that flight was illegal.. IMHO that is reckless and you are jeopardising all the hard work that the BMFA has carried out to gain us the height restriction exemptions.. Edited By Martyn K on 28/11/2018 11:43:54 Quote Link to comment Share on other sites More sharing options...
Bonzo Moon Posted November 28, 2018 Share Posted November 28, 2018 Posted by Martyn K on 28/11/2018 11:42:52: If this video was taken in September 2018 then at 3000ft above take off height then that flight was illegal.. IMHO that is reckless and you are jeopardising all the hard work that the BMFA has carried out to gain us the height restriction exemptions.. Edited By Martyn K on 28/11/2018 11:43:54 As I was flying a paramotor and not a drone or rc model, it was not illegal! My post does say 'I was hand holding the camera' too. I thought pretty clear that it wasn't a model flight. I do know the drone code and CAA regs and I'm pilot rated as a paraglider pilot so amongst other things have studied air law I was flying VFR and there is no restricted airspace at that location. Had it have been a drone flight it would have indeed been very stupid and reckless! Edited By Bonzo Moon on 28/11/2018 12:01:22 Edited By Bonzo Moon on 28/11/2018 12:02:05 Edited By Bonzo Moon on 28/11/2018 12:05:23 Edited By Bonzo Moon on 28/11/2018 12:21:51 Quote Link to comment Share on other sites More sharing options...
Martyn K Posted November 28, 2018 Share Posted November 28, 2018 Apologies BM. That wasn't clear to me.. Quote Link to comment Share on other sites More sharing options...
Bonzo Moon Posted November 28, 2018 Share Posted November 28, 2018 Posted by Martyn K on 28/11/2018 13:05:10: Apologies BM. That wasn't clear to me.. No worries Martyn, it really annoys me too when I see people obviously disregarding CAA regs and drone code regs on Facebook groups. It just takes a few idiots to ruin things for everyone. Quote Link to comment Share on other sites More sharing options...
Former Member Posted November 28, 2018 Share Posted November 28, 2018 [This posting has been removed] Quote Link to comment Share on other sites More sharing options...
Martyn K Posted November 29, 2018 Share Posted November 29, 2018 I thought is was a hand held camera mounted on a model - . Rather than a dashcam or whatever people use nowadays So easy to get things wrong.. Martyn Quote Link to comment Share on other sites More sharing options...
Allan Bennett Posted December 29, 2018 Author Share Posted December 29, 2018 If you're referring to my setup, yes it was a hand held camera (Canon Ixus) lashed onto my drone. Anyway, I've made progress now, I hope: Santa brought me a Runcam Split 2s, and I found a camera-mounting board off an old quad, with soft rubber isolators, so I've installed that on my present quad and stuck the lens of the Runcam onto that with 3m foamy tape. I'm now waiting for good flying weather to test it out. Thanks for all the contributions. Quote Link to comment Share on other sites More sharing options...
Allan Bennett Posted January 7, 2019 Author Share Posted January 7, 2019 Update: My attempt at a proper flight a week ago was thwarted by a disconnected GPS lead which caused my flight controller to refuse to arm. Re-soldered it today, and did a very short flight in the back garden, and am very happy with the result; nice sharp images, with no vibration evident. Quote Link to comment Share on other sites More sharing options...
Allan Bennett Posted January 13, 2019 Author Share Posted January 13, 2019 Update #2: Today, despite the wind, I managed to get a decent flight at our club's flying field. Although I didn't go high enough to get a really good panorama, and the weather was overcast and dull, I've proven to myself that the quality of the video is excellent. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.