Edgeflyer Posted January 24, 2023 Share Posted January 24, 2023 I have 2 YEP escs and need to program them I have a yep card which has 6 function menu options on the card then 7 more on a fold out menu. The trouble is when you first initialize the card are you on the first 6 or second 7 menu options? Quote Link to comment Share on other sites More sharing options...
Denis Watkins Posted January 24, 2023 Share Posted January 24, 2023 (edited) Phil, did we start off with Turningy? Which is here https://manuals.plus/turnigy/plush-32-series-esc-programming-card-manual#axzz7rJCSyLf4 I don't know YEP But YouTube has full YEP set up Edited January 24, 2023 by Denis Watkins Quote Link to comment Share on other sites More sharing options...
PeterF Posted January 24, 2023 Share Posted January 24, 2023 I have several YEP and several YGE that they are copied from and when turned on you start with Timing....Brake....Cut off....etc with the fold over sheet folded closed over the board. Quote Link to comment Share on other sites More sharing options...
Martin McIntosh Posted January 25, 2023 Share Posted January 25, 2023 Somewhere one this forum I posted how to change one of these from the supplied heli mode to fixed wing, but blowed if I know where it was, maybe on Martin`s Hawk. Just google them and everything should become clear. It is difficult to get things very wrong. Quote Link to comment Share on other sites More sharing options...
David Ovenden Posted January 25, 2023 Share Posted January 25, 2023 Manual on the HK site. YEP programme_card.pdf Quote Link to comment Share on other sites More sharing options...
Edgeflyer Posted January 26, 2023 Author Share Posted January 26, 2023 Thanks David. This helps greatly. Quote Link to comment Share on other sites More sharing options...
SIMON CRAGG Posted January 26, 2023 Share Posted January 26, 2023 I'm afraid I gave up on YEP Esc's a couple of years ago, and resorted to the good old Hobbywing Skywaker series. I found the YEP card, way to complicated and fiddly to set up. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.