Jump to content
Please be aware of scammers when using the Sale/Wanted forum areas

Jake Bullit

Members
 View Profile  See their activity

  • Posts

    154

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by Jake Bullit

  1. Jake Bullit
  2. Jake Bullit
    My Volantex Spitfire bound to my tx16s was difficult to fly without stabilization. Until I put some nose weight in the form of 3x5p in the battery compartment. Flies great now.
  3. Jake Bullit
    Out on the local lake again with the Skipper ,flew 5 packs on a cold drizzly day. Great fun though.
  4. Jake Bullit
    Not yet 😁. I've got a reverse ESC in just in case it gets stuck.
  5. Jake Bullit
    Been having a lot of fun with my new Joysway Skipper lately,flying off big puddles at our field both liquid and frozen. Today was my first time flying off a decent size lake,had a lot of fun despite the cold. Only had the phone cam ,so just a few clips https://www.youtube.com/watch?v=Ax_K4DCdh_g
  6. Jake Bullit
    Was at the field just after eight this morning. It was minus two but blue sky and negligible wind. Flew a variety of models including Twin Nova, Skipper, 800mm Mustang and T1 Ranger. with four members by the end of the morning. Cold but fun.
  7. Jake Bullit
    I use Phoenix. It's abandon ware and is now maintained by enthusiasts with a wide range of models and flying sites being added all the time. Download links in first post:. https://www.rcgroups.com/forums/showthread.php?2382571-User-Built-Models-for-PhoenixRC
  8. Jake Bullit

    Toasted!

    Jake Bullit replied to i12fly's topic in Chit-chat

  9. Jake Bullit
    Had my new Skipper and Xiake VTOL out today.Top fun on the ice. https://www.youtube.com/watch?v=y61xUPyb6Z4
  10. Jake Bullit
    Either of these two models would make good trainers and come with everything you need to get started. https://www.modelshopleeds.co.uk/catalog/product_info.php?cPath=37_763&sort=1a&products_id=62417 https://www.modelshopleeds.co.uk/catalog/product_info.php?cPath=37_763&sort=1a&products_id=67310
  11. Jake Bullit
    Fitted led cob lights to my T1 Ranger
  12. Jake Bullit
    I use this wireless dongle,works great with my old Frsky Taranis,just binds like a regular rx: https://www.hobbyrc.co.uk/frsky-xsr-sim-wireless-simulator
  13. Jake Bullit
    This guy is genius and funny:
  14. Jake Bullit
    Download PhoeniX Sim.Its great.Loads of user made models and flying sites ,and its FREE! https://www.rcgroups.com/forums/showthread.php?2382571-User-Built-Models-for-PhoenixRC
  15. Jake Bullit
    Have you got the servos plugged in with the signal on top?
  16. Jake Bullit
    T-shirt weather in Southport yesterday.A selection of models flown yesterday:
  17. Jake Bullit
    Following a Stampe being buddied @ Southport Model Aero Club
  18. Jake Bullit
    Checkout the Lippisch p15 from Motion RC. Fantastic flier ,and reasonably priced too. https://www.motionrc.eu/products/freewing-lippisch-p-15-64mm-edf-jet-pnp They`ve just brought out a 64mm Banshee that will run on 4s .Definitely going on my shopping list.
  19. Jake Bullit
    BBMF Lancaster flew four circuits round our villages en route to the Blackpool Air Show.Then met up with a Spit and a Hurri . The Pilot went to our local school ,so every time they`re nearby they try and divert over our village. Sadly this will be the last one as he`s moving on after this year.
  20. Jake Bullit
    HobbyRC are fast and reliable.
  21. Jake Bullit
    Alan with his dad flying his Stampe at Southport Model Aero Club:
  22. Jake Bullit
    My new Xfly Twin Nova. I believe it's discontinued by Xfly in Europe and I got one of the last stock from Kings Lynn Models. It's now been taken on and rebadged by Multiplex. Flies great, not needed any trim, just a bit of elevator mixed with the flaps.
  23. Jake Bullit
    A bit of video here.Not good quality though as its been re-downloaded,also was a windy day so the wind noise is blocking the sound as well as the noise from a noisy wing.Sounds best when diving ,motor off. WHISTLE.mp4
  24. Jake Bullit
    Been using these 3d printed whistles on a couple of models for a while now.Need to get the placement right ,but they sound cool.A few of the lads at our club have since followed suit. https://www.thingiverse.com/thing:4591854
  25. Jake Bullit
    here's my Honda CB750F that i built years ago. like the real one that I have a half share in there are a few missing
×
×
  • Create New...