Jump to content
Please be aware of scammers when using the Sale/Wanted forum areas

jrman

Members
 View Profile  See their activity

  • Posts

    521

  • Joined

  • Last visited

 Content Type 

Everything posted by jrman

  1. jrman
    Try "Model Fixings".
  2. jrman
    That's exactly the way I have covered 3 Piper Cubs (2 1/4 scale and 1 1/5 scale) Easier than it sounds, isn't it? Avatar is one of the 1/4 scale. I used the same technique on a 1/4 scale SpacewalkerII.
  3. jrman
    Was it the Bar Fli ?
  4. jrman
    I can't get any page to load from the new home page.
  5. jrman
    The Achievement Scheme site is working. ?
  6. jrman
    90deg to each other is correct but don't worry about position relative the ground, the aircraft certainly won't! Ensure the aerials are not close to or shielded by the battery, esc or any other metallic parts also try not to have the them in the same plane as undercarriage wire. Before you attempt to fly it do a full 360deg walkaround test to check for any blind spots.
  7. jrman
    Then definitely cut them flush.
  8. jrman
    I would suggest cutting off the bolts flush with the T nuts. If the lipo slides forward in a poor landing you might be in for more than just a broken prop. To stop sliding just put a small piece of velcro on the lipo and on its tray.
  9. jrman
    I am a"B" and my new number is shown. Not sure what logic is being used by the CAA, if any. p.s. Martin you can carry on "fondling" as I think it's still legal!
  10. jrman
    Just received my new OP ID. Have they made it long enough? ?
  11. jrman
    Gunsmiths: Leadshot for cartridges.
  12. jrman
    Unlikely you will get hit for Duty (value too small) but you likely will and should expect to pay UKVAT (20%). The cut off point for no VAT is around £15 including shipping. The handling charge will be subject to the shipping option chosen. I think the days of no UKVAT on Chinese sourced goods has gone. Edited By jrman on 13/01/2021 16:14:41
  13. jrman
    Thanks David and other Mods.
  14. jrman
    I agree KC. That thread was normally one of the first I looked at to see the latest "funnies". Moderation's OK but not total censorship. Please think again.
  15. jrman
    Yes please.
  16. jrman
    Could be very handy.
  17. jrman
    Certainly worth a try.
  18. jrman
    Still not working for me. Looks like the CAA renewal is not available for another 23 days!!!
  19. jrman
    Contrary to the BMFA's email, renewal is not available until 2nd Dec.
  20. jrman
        Edited By jrman on 28/11/2020 16:05:11
  21. jrman
    And everything is "basically".
  22. jrman
    Ripmax probably forgot to add them to their order.
  23. jrman
    Have you tried Just Engines ?
  24. jrman
    One of my pet hates, along with all those listed previously is the incorrect use of "non" when "none" should be used.
  25. jrman
    Steve, Very little stock in the UK. I get most of my needs from here: **LINK**
×
×
  • Create New...