malmaz Posted August 21, 2019 Share Posted August 21, 2019 Can anybody tell me who will cut me a set of foam wings and tailplane for a Hanno Prettnor Curare I am going to build from a plan. Thanks malc Quote Link to comment Share on other sites More sharing options...
Masher Posted August 21, 2019 Share Posted August 21, 2019 You have 2 obvious choices: billkits Cloud I have used both and can recommend both Quote Link to comment Share on other sites More sharing options...
Alan Hilton Posted August 21, 2019 Share Posted August 21, 2019 I have used Bill Kits and have no problem in recommending them ,excellent service excellent product Alan Quote Link to comment Share on other sites More sharing options...
edgar Posted August 21, 2019 Share Posted August 21, 2019 I had some excellent wings from Geoff at Foamwings last year. Last time I looked his website was less than wonderful (no option to email) but he is very helpful and my wings were ready in 10 days. Quote Link to comment Share on other sites More sharing options...
malmaz Posted August 29, 2019 Author Share Posted August 29, 2019 Thanks for the reply's, having them done by cloud models. Many thanks Malc Quote Link to comment Share on other sites More sharing options...
dany ethical Posted August 30, 2019 Share Posted August 30, 2019 You can try bill kits and I am having a good service from them. Quote Link to comment Share on other sites More sharing options...
wingcoax Posted April 9, 2020 Share Posted April 9, 2020 Sorry if i am hi-jacking this thread, BUT, I am having a set of cores cut by Billkits at the moment. It is a "Stinger" delta by Terry Eato and am looking for the article on construction. I am not sure which mag it was in but is a MEGA PLAN. Is there anyone out there who can help. Quote Link to comment Share on other sites More sharing options...
kc Posted April 9, 2020 Share Posted April 9, 2020 You need RCME April 92 for the Stinger article. The plan is now MAG184 from Sarik, I have sent you a Private Message with the details of where you could buy the magazine. Quote Link to comment Share on other sites More sharing options...
Mark Kettle 1 Posted April 9, 2020 Share Posted April 9, 2020 RCME did the Stinger, I built one in the mid '90's, the balance is wrong on the plan it needs moving back quite a long way. When I meet Terry once, I mentioned the balance problem he agreed it flew better for moving it back I'll check my plan if I can find it, to check where it finished up at. Quote Link to comment Share on other sites More sharing options...
wingcoax Posted April 9, 2020 Share Posted April 9, 2020 Thanks guys, kc i have the plan in tracing form (ready for printing from) Mark thanks for the tip on CG Steve. Quote Link to comment Share on other sites More sharing options...
wingcoax Posted April 25, 2020 Share Posted April 25, 2020 I recently ordered a set of cores from Billkits, It has taken less than two weeks including discussions with Bill on the final requirements to them being in the post. When they arrive is in the lap of the gods due to post here in Portugal being behind "snail mail" Many thanks to BILL MANLEY. Quote Link to comment Share on other sites More sharing options...
Bruce Collinson Posted April 25, 2020 Share Posted April 25, 2020 I recently acquired a second hand ARTF Curare with a cowl cut out for I/c but kitted electric. I managed to source a replacement cowl from the German/Austrian supplier; Lindinger? If of use to you I’ll confirm the source. Might be the other people. BTC Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.