Johnny Andrews Posted October 9, 2022 Share Posted October 9, 2022 I’m trying to get hold of the programming details for the old ESC that I took out of my Riot. It’s now in a Cambrian Spitfire and I need to employ the braking for the belly landings. Any help would be appreciated I’ve tried the Century UK site but the instructions found there do not seem to apply to this ESC. Quote Link to comment Share on other sites More sharing options...
Colin Carpenter Posted October 9, 2022 Share Posted October 9, 2022 From memory I’ve programmed one with a standard card that has to be little jumper plugs on it !! Colin Quote Link to comment Share on other sites More sharing options...
Kim Taylor Posted October 10, 2022 Share Posted October 10, 2022 I believe that this is the instruction manual for the Riot esc. I'm not very good at this whole file importing thing, so I hope it has uploaded in a useable form. Kim Art Tech Controller.pdf Quote Link to comment Share on other sites More sharing options...
Johnny Andrews Posted October 12, 2022 Author Share Posted October 12, 2022 Thanks for this Kim but the link doesn’t seem to open? Quote Link to comment Share on other sites More sharing options...
Ace Posted October 12, 2022 Share Posted October 12, 2022 Works for me 👍 Quote Link to comment Share on other sites More sharing options...
Engine Doctor Posted October 12, 2022 Share Posted October 12, 2022 (edited) From memory I think that you power up with throttle fully open throttle and wait for one beep then close throttle this calibrated the throttle . Wait for another beep and that applies the braking . Repeat and wait for two beeps to remove braking . I believe that the make and type of ESC fitted to their models have changed over the years so instructions may vary. You could always give Century a ring. Tall Steve or Mark should know . Bearded Steve is the car man. I still have an Art-Tec Pc6 turbo porter and braking can be set on that as described. Link works fine for me Edited October 12, 2022 by Engine Doctor Quote Link to comment Share on other sites More sharing options...
EarlyBird Posted October 12, 2022 Share Posted October 12, 2022 Quote Link to comment Share on other sites More sharing options...
John Tee Posted October 12, 2022 Share Posted October 12, 2022 Johnny, when I clicked it ,it went to my downloads on the top ribbon. opened it from there. john Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.