Alan Hilton
Members-
Posts
318 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Everything posted by Alan Hilton
-
Bill also makes turtle decks
-
The carb spray bar should ideally be level with the tank centre line but I have found that somewhere within the tank is ok .I had a DB 1/4 pup with a laser 200 v twin .The tank was way above the carb but the engine ran fine if I didn’t fly inverted
-
Warbirds Replicas Hawker Tempest V -Mass Build 2024(part two) .
Alan Hilton replied to RICHARD WILLS's topic in Warbird kits
Same for me I won’t get started on mine till next autumn now -
Carbon tet was used as dry cleaning fluid too .All chlorinated hydrocarbons are toxic
-
A mossy gets my vote
-
Have you tried setting the tx to pcm ?
-
Warbirds Replicas Hawker Tempest V -Mass Build 2024(part two) .
Alan Hilton replied to RICHARD WILLS's topic in Warbird kits
Hi Richard I’m still up for one -
Talk to George at 4 max he is clued up It’s also worth looking on. the recomended set up section on the same web page
-
JR tx charging sockets are negative centre post, which is the reverse of normal, connect a normal charger and its a problem .There is probably a fuse as mentioned before .Have a look in the battery compartment , if its not there take the back off
-
Very nice work looking good . Will we see the new one at Hastings later in the year?
-
I have found the ones from 4 max very good .
-
Looking for an aerobatic electric plane
Alan Hilton replied to aduncan's topic in Sport, Aerobatic and 3D kits
Bill Manley of Bill kits makes nice foam wings, saves ages when building aerobatic models and perform well.He needs tip and root sections and a plan view -
Phoenix Tiger Moth 88 inch
Alan Hilton replied to Chris Freeman 3's topic in Scale and Semi-Scale kits
The 30% Toni Clark Tiger I used to own flew just right on a Zenoah 38 turning a 22 x 6 prop -
Take a sharp Stanley knife, put the tube on the bench ,then put the blade on the tube at 90 degrees to the tube ,then roll the tube back and forward using the knife to power the roll .It takes practice to keep the blade on the right place
-
My choice for a follow on is the acrowot .Its easy to fly and especially easy to land and will do aerobatics well
-
I sold Bert the tiger because my knackered back wouldn’t cope with big models any more .I flew it for years on a zenoah 38 and it was great .The prop was scale size (22 6 ) It flew scale like in most conditions .It was a bit tricky in a force 5 wind though .
-
You can use an old fridge compressor (backwards) for vac bagging as well .The Edward’s pump would be a bit powerful
-
Motor not starting smoothly
Alan Hilton replied to Graham Davies 3's topic in ESCs (Speed Controllers)
Sounds like the esc is cream krackered try another one -
What about a edf jet ?
-
Could be a George Formby impersonator rather than a fisherman
-
The original gangster 63 was great on an os 61 rf pumper its vertical performance was off the scale .If I did one today I would go for an os 91 surpass. I did modify the model to a tail dragger to accommodate the tuned pipe for the rf pumper
-
Watt even!!!
-
Wat was the question