Jump to content

Taranis balance bar?


Wookman
 Share

Recommended Posts

Anybody out there in radio land got one of the old type balance bars that they are never going use? Like this one

1204CE22-35AB-43D5-9B3E-43E7A944579B.thumb.jpeg.53a09b9f17a3e176e655cf275be86c21.jpeg

It apparently the early type. The later cranked type makes it impossible to close the case with it in the correct position. 

Link to comment
Share on other sites

Advert


5 hours ago, PatMc said:

It could be the Taranis Neck Strap & Bracket listed here.


The latter ones have a crank in them, and it sounds like the OP does not want one of those, though I suspect the foam in the case could be adjusted to take it.

 

image.png.e81465062916c2b266b30c06d6e1d40a.png

 

5 hours ago, Outrunner said:

Would you risk your TX and possibly a model on a 3d printed piece of plastic?


I don’t see why not. The Taranis is a light TX, you could easily oversize the bar width to add strength if you were worried, and people use 3D printed plastic in way more high stress areas than that these days. 

Edited by MattyB
Link to comment
Share on other sites

It looks like there are cheap aftermarket ones available on eBay, some designed for a vertically oriented attachment point, others a horizontal one. No idea on quality or whether they will meet the OP’s needs though…

 

image.thumb.png.c2ca73f68ae3cfe8b71d2b38d9d3e578.png

 

image.thumb.png.eeddaa5aac4ebd05afe382f92f3934b2.png

 

https://www.ebay.co.uk/sch/i.html?_nkw=Metal+4-Hole+Transmitter+Neck+Strap+Balancer+Adjuster&_trksid=m5467.l1311

Edited by MattyB
Link to comment
Share on other sites

12 hours ago, PatMc said:

It could be the Taranis Neck Strap & Bracket listed here.

Bought that exact one expecting it to be straight.

 

6 hours ago, MattyB said:

The latter ones have a crank in them, and it sounds like the OP does not want one of those, though I suspect the foam in the case could be adjusted to take it.

The hard case will not close with the cranked one in place. The problem being caused or perhaps at least compounded by having a DJT module in the back of the tx. The soft case wll zip up but resembles a small marquee!

  • Like 1
Link to comment
Share on other sites

  • 6 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...