Jump to content
Please be aware of scammers when using the Sale/Wanted forum areas

Alan Hilton

Members
 View Profile  See their activity

  • Posts

    319

  • Joined

  • Last visited

 Content Type 

Everything posted by Alan Hilton

  1. Alan Hilton
    Balsa Cabin do some flair kits including the SE5a
  2. Alan Hilton
    Thanks
  3. Alan Hilton
    Is it a coloured film with an adhesive layer or clear film with coloured adhesive ?[like solarfilm]
  4. Alan Hilton
    Looking very nice well done What engine ?
  5. Alan Hilton
    And me
  6. Alan Hilton
    I wouldn’t be without mine it’s a myford ml7 Which is a great machine ,mainly because there are loads of accessories readily available
  7. Alan Hilton
    I used my lathe to turn the spinner nut to. mimic the locking nut which worked well
  8. Alan Hilton
    Yes no problem
  9. Alan Hilton
    Thanks Geoff I remember measuring ir in a level physics ,it was a bit of a performance
  10. Alan Hilton
    I have thought about measuring internal resistance but I don’t have a fixed resistor .What value would be appropriate for 6 s lipos .
  11. Alan Hilton
    Haven’t come across powder bonded chop is it common ?
  12. Alan Hilton
    If it’s glass chop it’s got to be polyester ,epoxy won’t work with chop due to silicone which is used to hold the chop together . If it’s glass mat it could be ether so smell it
  13. Alan Hilton
    Bill from Bills kits makes some very nice foam wings . Could be a way forward
  14. Alan Hilton
    I have futaba and jr servos that I have had for 30 years ,and have been well used ,that are still working as well as the day I bought them . How cheap were these ?
  15. Alan Hilton
    Hi Ron could you help with a couple of these for my Ju88 please I can’t find a link to personal messages on the new layout hence the post here
  16. Alan Hilton
    Thanks Martin watching with interest
  17. Alan Hilton
    Looking good chaps . I’m watching with interest .I am finishing my ju88 at the moment ,the la 7 is next on the building board .I am going electric ,my thinking at the moment is to make some of the front decking removable for battery access . Have you any thoughts ?
  18. Alan Hilton
    If it’s the same as one I owned years back the valve seats are phosphor bronze so grinding paste doesn’t work well .I had the seats recut ,it took a 45 degree cutter if I remember correctly
  19. Alan Hilton
    Never could tell the difference between a lean or rich cut !!
  20. Alan Hilton
    I prefer screws ,it’s easy to plug pulled out screw holes after a difficult landing .The same landing with captives can lead to pulled out u/c plates and a right mess
  21. Alan Hilton
    Sounds and looks rich
  22. Alan Hilton
    Grow up
  23. Alan Hilton
    Maybe but the whole thread is about pva which is fairly safe so a casual reader may get the wrong message
  24. Alan Hilton
    This looks more like the foaming PU glue not the aliphatic
  25. Alan Hilton
    In my experience 2 volts is too much for most glow plugs but OS F types are fine .
×
×
  • Create New...