john stones 1 - Moderator Posted May 23, 2014 Share Posted May 23, 2014 That looks stunning Cuban 8, lovely model John Quote Link to comment Share on other sites More sharing options...
Gary Vinten 1 Posted May 23, 2014 Share Posted May 23, 2014 Here Is mine not maidened yet peter miller cap 21 free plan Quote Link to comment Share on other sites More sharing options...
Cuban8 Posted May 23, 2014 Share Posted May 23, 2014 Thought you'd like to see the full size.........OK, OK I know it's a slightly different version but I liked the simple colour scheme of the sponsoring Yugoslav brewery! Quote Link to comment Share on other sites More sharing options...
jeff2wings Posted May 25, 2014 Share Posted May 25, 2014 Love the Cap and the Zlin ,two of my favorite aerobatic planes in both full size and model Just another Acrowot ARTF ,Lazer 70 ,just the Pitts to finish and then back to the Barnstomer build Quote Link to comment Share on other sites More sharing options...
simon burch Posted May 25, 2014 Share Posted May 25, 2014 Now awaiting her maiden. Cheers, Simon Quote Link to comment Share on other sites More sharing options...
john stones 1 - Moderator Posted May 25, 2014 Share Posted May 25, 2014 What's that Simon ? What's powering it ? John Quote Link to comment Share on other sites More sharing options...
Tony Bennett Posted May 25, 2014 Share Posted May 25, 2014 awaiting its maiden. and also awaitng the right weather. Quote Link to comment Share on other sites More sharing options...
simon burch Posted May 25, 2014 Share Posted May 25, 2014 It's a PST Reaction with a Jetcat 90rxi in the back. Cheers, Simon Quote Link to comment Share on other sites More sharing options...
Tony F Posted May 25, 2014 Share Posted May 25, 2014 My new 1400mm J3 electric 4s Cub. Tony Quote Link to comment Share on other sites More sharing options...
avtur Posted May 26, 2014 Share Posted May 26, 2014 The latest 'Cub' from Parkzone, this is the very recently released 'Sport Cub', Quote Link to comment Share on other sites More sharing options...
Tom Wright 2 Posted May 26, 2014 Share Posted May 26, 2014 While on the subject of Cubs. Quote Link to comment Share on other sites More sharing options...
Cliff Bastow Posted May 29, 2014 Share Posted May 29, 2014 My latest, bought of E-bay as damaged as I wanted the motor for another project. However when I got it home I discovered that all that was wrong was the uc had been ripped out. I decided it was too good to scrap so I repaired it instead. Now of course I still need a motor for my project! Quote Link to comment Share on other sites More sharing options...
Reno Racer Posted May 30, 2014 Share Posted May 30, 2014 Quote Link to comment Share on other sites More sharing options...
Giuseppe Saroli Posted May 30, 2014 Share Posted May 30, 2014 Here mine Savage Bobber This one was the electric prototype made all in balsa the other one is big 82" span all carbon with a 1979 os 120 Gemini mk1 just half way with the wings construction based on the zling aviation Savage Bobber Quote Link to comment Share on other sites More sharing options...
Paul Marsh Posted May 30, 2014 Author Share Posted May 30, 2014 Like the Cub and like the Gemini twin. Ideal combination, apart from a Cub with a OS flat 4 Pegasus! Quote Link to comment Share on other sites More sharing options...
ron evans Posted May 30, 2014 Share Posted May 30, 2014 This is my cartoon Cutlass, not exactly new (100 flights old ) but my latest build. Quote Link to comment Share on other sites More sharing options...
Cyclicscooby Posted June 1, 2014 Share Posted June 1, 2014 Wow.. Some nice planes in the last 14 odd pages... Here are my newbies... A bought CZC.. I'm sure you didn't need telling that tho... My Own design 1200mm Sbach-ish Foamie.. Hung on the ceiling, with literally wet paint, to make room for the CZC, so as yet unflown.. Own moulded canopy and wing tip nav light covers, 500w 4s, 1200g's This is a beefed up thicker stronger plane to replace my previous foamie hack, which did NOT appreciate a power hike from 130watts, to 500watts..! PS.. A single 6mm sheet foamie, with 5mm CF, wont handle 500watts.. Trust me.. And finally, not strictly for this site, but another project.. A Bruder DHL Sprinter van, which i'm gonna convert into a 4x4 camper van, to tow a, yet to be decided, 4x4 car.. Unfortunately, the prime candidate for the towed 4x4, is also the vans donor running gear... An OD rock crawler, made with a brass chassis, A-tech truck running gear, and a RR Sport shell off a Maplin rubbish RC.. Luv Chrisie.. xx Quote Link to comment Share on other sites More sharing options...
Ian101 Posted June 2, 2014 Share Posted June 2, 2014 72" depron jobby. Built from Tony Nijhuis plans. Robart scale wheels on retracts. 17" prop, 550kv outrunner, 3s 6000mah (at the moment) 60amp esc. Maiden last night. Ian Quote Link to comment Share on other sites More sharing options...
john stones 1 - Moderator Posted June 2, 2014 Share Posted June 2, 2014 Like your sbach Chrissie, looks fun Very nice Spit + garden Ian John Quote Link to comment Share on other sites More sharing options...
Steve Houghton 1 Posted June 2, 2014 Share Posted June 2, 2014 My new Dream Flight Libelle DLG My RCM Pelikan Elegant 2.66m thermal soarer bought off eBay And what my current build project will look like once I've finished it. The Traceur. Steve **LINK** Quote Link to comment Share on other sites More sharing options...
Mike Etheridge 1 Posted June 2, 2014 Share Posted June 2, 2014 Phil Claridge's Super Air almost repaired just the tailplane and rudder to cover and radio plus engine to fit. Fifteen year plus old RM Trainer with new aileron wings yet to fly as is the YAK 55. The club's (BPMFC) scale competition to conclude on Sunday next so I must dig out my acquired SE5A that I have yet to fly. I seem to have done building mostly this year with only one short flying session. MJE Quote Link to comment Share on other sites More sharing options...
kevin b Posted June 3, 2014 Share Posted June 3, 2014 Got so fed up with the wind not dying down I built this. Just waiting for the radio switch to arrive. Quote Link to comment Share on other sites More sharing options...
Bill_B Posted June 4, 2014 Share Posted June 4, 2014 This isn't exactly a new model, just a make over. After a couple of years of ownership I decided to freshen up my AcroWot Foam-E with a more modern colour scheme. The decals are simply hand cut from Fablon and fixed in place with a covering iron on low heat. The scheme may not be everyone's cup of tea, but at least it's different to the rest. Quote Link to comment Share on other sites More sharing options...
David Pearce 4 Posted June 4, 2014 Share Posted June 4, 2014 Bill, that's a great scheme, very good bit of designing and nice to see something more like a real display aircraft than some of the crazy schemes around. David Quote Link to comment Share on other sites More sharing options...
Bill_B Posted June 4, 2014 Share Posted June 4, 2014 Thanks for the compliment David. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.