Kenny Johnson Posted April 5, 2018 Share Posted April 5, 2018 After 10-11 years break from flying I'm going to try and get back into flying. going through my gear i've everything apart from a clue about what tranny to use, i've ff9 that i bought a year or so new before i stopped flying but now everything is 2.4..... is it worth using my old gear or not even thinking about cheers, Quote Link to comment Share on other sites More sharing options...
Alan Gorham_ Posted April 5, 2018 Share Posted April 5, 2018 Hi Kenny I've got an FF9 of the exact same age and I still use it regularly. It's been a quality bit of kit that I've had great use out of. Bear in mind that the RF part of this transmitter is a removable module so you can fit a 2.4GHz module if you like or stay on 35MHz). There are at least 4 manufacturers of 2.4GHz modules that fit, so you would have to evaluate their features and decide which one suits you best. I use my FF9 on both 35MHz and 2.4. The disadvantages to 35MHz now are the lack of frequency control at some sites (both club and remote sites such as slope soaring), but the advantages are that not many people fly on 35MHz and that used high-end receivers are available cheaply. It's a pay-your-money-take your choice type decision... Quote Link to comment Share on other sites More sharing options...
ChrisB Posted April 5, 2018 Share Posted April 5, 2018 Nothing wrong with 35meg. Works perfectly well provided frequency control is observed. I fly a combination of spektrum Dx9 and JR9x 35 Quote Link to comment Share on other sites More sharing options...
gangster Posted April 5, 2018 Share Posted April 5, 2018 The FF9 is a nice radio . It would be a shame not to use it and you may have to spend a lot of money to get anything of that quality. 35 is fine although the comments made about control could be valid depending on where you fly. Another option that has already been offered which is to use a 2.4 module to convert it. An option to consider is the FRaky module. These and the matching receivers are incredible value for money they seem well made and totally reliable I have not heard anything negative about them. All my glow models are using a JR 9pcm9 and frsky2.4 bits Quote Link to comment Share on other sites More sharing options...
Mike T Posted April 5, 2018 Share Posted April 5, 2018 The only problem with 35 now is Clubs themselves; many have banned it because it's an 'easy out' as far as frequency control is concerned. Quote Link to comment Share on other sites More sharing options...
J D 8 Posted April 5, 2018 Share Posted April 5, 2018 35 still in use for some little flown models,not worth changing. Edited By J D 8 on 05/04/2018 13:56:42 Quote Link to comment Share on other sites More sharing options...
Kenny Johnson Posted April 5, 2018 Author Share Posted April 5, 2018 Posted by Alan Gorham_ on 05/04/2018 12:40:49: Hi Kenny I've got an FF9 of the exact same age and I still use it regularly. It's been a quality bit of kit that I've had great use out of. Bear in mind that the RF part of this transmitter is a removable module so you can fit a 2.4GHz module if you like or stay on 35MHz). There are at least 4 manufacturers of 2.4GHz modules that fit, so you would have to evaluate their features and decide which one suits you best. I use my FF9 on both 35MHz and 2.4. The disadvantages to 35MHz now are the lack of frequency control at some sites (both club and remote sites such as slope soaring), but the advantages are that not many people fly on 35MHz and that used high-end receivers are available cheaply. It's a pay-your-money-take your choice type decision... thinking i'll get the module and give it ago, just looked up spectrum model for £90, i thinks its worth a punt to see if i feell like getting back into it 100%. long gone are my examiner days i'll just stick to local farmers fields and see what happens. Quote Link to comment Share on other sites More sharing options...
Frank Skilbeck Posted April 5, 2018 Share Posted April 5, 2018 I've just converted a MPX 3030 I acquired back to 35mhz so I can make use of some of my old receivers for models i just fly down the club field, yes we still have a peg board and a few members have some models still on 35mhz. Quote Link to comment Share on other sites More sharing options...
Peter Christy Posted April 5, 2018 Share Posted April 5, 2018 Posted by Kenny Johnson on 05/04/2018 15:07:23: thinking i'll get the module and give it ago, just looked up spectrum model for £90, i thinks its worth a punt to see if i feell like getting back into it 100%. Good Grief! That's over 4 times the cost of a FrSky module! For that money, you could have the FrSky module and three receivers! Don't be put off by the price! FrSky stuff is good! Checkout T9Hobbysport (amongst others...) -- Pete Quote Link to comment Share on other sites More sharing options...
Simon Chaddock Posted April 5, 2018 Share Posted April 5, 2018 Kenny If you are just flying from farmers fields (and alone?) then stick with your 35 meg. It works just as well as 2.4 and in some cases even better. The only issues are when you fly from a club when strict frequency control is a must. In general so few use 35 you are very unlikely to get accidentally 'shot down' by anyone (or you shoot down someone else!) unless you fly within a couple of miles of an active 35 meg club. If you find you want to get seriously back into 'club' flying then move to 2.4 Quote Link to comment Share on other sites More sharing options...
Former Member Posted April 5, 2018 Share Posted April 5, 2018 [This posting has been removed] Quote Link to comment Share on other sites More sharing options...
Don Fry Posted April 5, 2018 Share Posted April 5, 2018 In practical terms, check the batteries in your kit. If in doubt, bin the batteries. Bin the switches. Don't spend anything until you are back in the groove, then look round at what others use, and take your time. What you have got was good then, and still good today. But don't move on to 2.4 in haste, make the right choice for you, don't get bounced into it by the noisiest can rattling down the road. Welcome back to this vale of tears, doubt, and self flagellation. Quote Link to comment Share on other sites More sharing options...
PatMc Posted April 5, 2018 Share Posted April 5, 2018 Posted by Peter Christy on 05/04/2018 16:01:11: Posted by Kenny Johnson on 05/04/2018 15:07:23: thinking i'll get the module and give it ago, just looked up spectrum model for £90, i thinks its worth a punt to see if i feell like getting back into it 100%. Good Grief! That's over 4 times the cost of a FrSky module! For that money, you could have the FrSky module and three receivers! Don't be put off by the price! FrSky stuff is good! Checkout T9Hobbysport (amongst others...) -- Pete I totaly agree with Peter. This module will fit the FF9. Coupled with one of these D8 or D4 receivers you have a good solid setup which includes basic audio warning of low Rx battery & when Rx is near max rf range at no extra cost. Quote Link to comment Share on other sites More sharing options...
gangster Posted April 5, 2018 Share Posted April 5, 2018 Don’t forget the V8 FR receivers even cheaper about £20 do 8 channel. Don’t be put off by the price Frsky consistently gets good reports on this very forum . Many other mainstream radios cannot boast the same claim Quote Link to comment Share on other sites More sharing options...
Former Member Posted April 5, 2018 Share Posted April 5, 2018 [This posting has been removed] Quote Link to comment Share on other sites More sharing options...
Kenny Johnson Posted April 5, 2018 Author Share Posted April 5, 2018 Posted by Don Fry on 05/04/2018 16:41:00: In practical terms, check the batteries in your kit. If in doubt, bin the batteries. Bin the switches. Don't spend anything until you are back in the groove, then look round at what others use, and take your time. What you have got was good then, and still good today. But don't move on to 2.4 in haste, make the right choice for you, don't get bounced into it by the noisiest can rattling down the road. Welcome back to this vale of tears, doubt, and self flagellation. hi Don just been over my batteries and put them in the "to be binned" pile, reading these posts has made my mind up for the frsky gear..... I want to get back into flying but nothing like I use to, the club I joined where I live really smacked the fun out of the hobby, I've a couple of the dreaded drones that I've been flying for a couple years but always ended up flying them around like helis and just forget to take photos like theyre are ment for...lol ken Quote Link to comment Share on other sites More sharing options...
Kenny Johnson Posted April 5, 2018 Author Share Posted April 5, 2018 Posted by Simon Chaddock on 05/04/2018 16:07:14: Kenny If you are just flying from farmers fields (and alone?) then stick with your 35 meg. It works just as well as 2.4 and in some cases even better. The only issues are when you fly from a club when strict frequency control is a must. In general so few use 35 you are very unlikely to get accidentally 'shot down' by anyone (or you shoot down someone else!) unless you fly within a couple of miles of an active 35 meg club. If you find you want to get seriously back into 'club' flying then move to 2.4 thinking i'll get the frsky gear and also use the 35meg, must admit looking forward to sorting out the gear and treating myself to a couple of kits(you know the wife is going to regret this again) ken Quote Link to comment Share on other sites More sharing options...
gangster Posted April 5, 2018 Share Posted April 5, 2018 Posted by Percy Verance on 05/04/2018 18:58:29: Many? Ok most then. I guess there ain’t that many. 😄 Quote Link to comment Share on other sites More sharing options...
Geoff S Posted April 5, 2018 Share Posted April 5, 2018 Posted by Percy Verance on 05/04/2018 16:22:59: I agree fully with Simon. It's also worth remembering that 35mhz was a band exclusive to model flying, with no other users. That can't be said of 2.4ghz..... I always found 35mhz worked perfectly for me. Any problems or issues I saw were caused by human failings, not 35mhz failings ......... The only thing wrong with Percy's comment is the tense. 35Mhz is still an exclusive model flying frequency. I use 2.4gHz and I've had no problems but always lurking at the back of my mind is the fact that everyone and his dog uses 2.4gHz (including our doorbell!) and it just may come back to bite us. My first tentative steps into 2.4gHz was a Frsky module plugged into the back of an old FF7 Super and that worked very well. I also used a Frsky DiY module so that I could use my then main transmitter (a Mux3030) on Frsky 2.4 gHz. I nw have Frsky Taranis and Horus transmitters and they're brilliant. Remember the main cost of a radio system isn't the single purchase of the transmitter but the repeated cost of receivers and Frsky come out well on that score. Having said that I still have several models with Mux IPD receivers on 35Mhz which perform perfectly. It'ms just that they're not quite so immune to being shot down by someone on the same channel but that's becoming increasingly unlikely Geoff Quote Link to comment Share on other sites More sharing options...
Paul Marsh Posted April 5, 2018 Share Posted April 5, 2018 No, all my gear is now 2.4. Sold 99% of my 35 meg stuff a while back. Kept a couple of JR Max 5's, a X347 and a Futaba FF7 and a Challenger 6 for nostalga reasons. Only have 2 JR rx's left, but won't use them for flight again Edited By Paul Marsh on 05/04/2018 20:32:14 Quote Link to comment Share on other sites More sharing options...
Stuart Z Posted April 6, 2018 Share Posted April 6, 2018 Posted by Geoff Sleath on 05/04/2018 20:28:18: Posted by Percy Verance on 05/04/2018 16:22:59: I agree fully with Simon. It's also worth remembering that 35mhz was a band exclusive to model flying, with no other users. That can't be said of 2.4ghz..... I always found 35mhz worked perfectly for me. Any problems or issues I saw were caused by human failings, not 35mhz failings ......... The only thing wrong with Percy's comment is the tense. 35Mhz is still an exclusive model flying frequency. I use 2.4gHz and I've had no problems but always lurking at the back of my mind is the fact that everyone and his dog uses 2.4gHz (including our doorbell!) and it just may come back to bite us. My first tentative steps into 2.4gHz was a Frsky module plugged into the back of an old FF7 Super and that worked very well. I also used a Frsky DiY module so that I could use my then main transmitter (a Mux3030) on Frsky 2.4 gHz. I nw have Frsky Taranis and Horus transmitters and they're brilliant. Remember the main cost of a radio system isn't the single purchase of the transmitter but the repeated cost of receivers and Frsky come out well on that score. Having said that I still have several models with Mux IPD receivers on 35Mhz which perform perfectly. It'ms just that they're not quite so immune to being shot down by someone on the same channel but that's becoming increasingly unlikely Geoff Interesting- I have two FF7’s that could do with conversion. Both have new batteries and have been checked so the FrSky modules sound a good option. Knowing nothing about FrSky can I ask which module and which receivers I should go for? Thanks for help and info S Quote Link to comment Share on other sites More sharing options...
Mowerman Posted April 6, 2018 Share Posted April 6, 2018 The only thing against 35 MHz occurs if you still have old models with it installed but are now mainly using 2.4 in your latest models then one day decide to fly that. old hanger queen, and forget to extend the 35 Tx ariel, don't ask me how I know !! . Edited By Mowerman on 06/04/2018 11:19:34 Quote Link to comment Share on other sites More sharing options...
Peter Christy Posted April 6, 2018 Share Posted April 6, 2018 This is the Futaba compatible module: **LINK** And any of the D-series receivers: **LINK** You could also use V series receivers (without telemetry), but you would either have to remember to switch between the different types, or some V receivers will bind to a D Tx by using a jumper when binding. Simpler to stick with D series! BTW, don't be put off by the quoted 60mW quoted power output for the module. ALL legal 2.4 GHz Txs are 60mW output! The aerials have 2dB of gain, which brings the ERP (Effective Radiated Power) up to 100mW. -- Pete Quote Link to comment Share on other sites More sharing options...
Stuart Z Posted April 6, 2018 Share Posted April 6, 2018 Thanks Pete I’ll take your advice and try the module and the D series rx. Never had telemetry so don’t really know much about it. Would it work OK with the FF7? S Quote Link to comment Share on other sites More sharing options...
Kenny Johnson Posted April 6, 2018 Author Share Posted April 6, 2018 Posted by Peter Christy on 06/04/2018 11:20:12: This is the Futaba compatible module: **LINK** And any of the D-series receivers: **LINK** You could also use V series receivers (without telemetry), but you would either have to remember to switch between the different types, or some V receivers will bind to a D Tx by using a jumper when binding. Simpler to stick with D series! BTW, don't be put off by the quoted 60mW quoted power output for the module. ALL legal 2.4 GHz Txs are 60mW output! The aerials have 2dB of gain, which brings the ERP (Effective Radiated Power) up to 100mW. -- Pete i'm going to order these this weekend, aint got no planes yet as they got all thown in a heated debate with the wifey....lol kenny Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.